slowpoke450r
02-05-2008, 11:34 AM
Hi, I have a crf hybrid atv. I put in an electrex stator with a lighting output coil and a voltage regulator on it to add lights. Good idea but not effective enough. Won't power 2 trail tech 35w lights very well at low rpm's, one light fine but not two. New plan, add a battery to supply power at the lower rpm's, 400ex box and battery cause it will mount on my subframe. 300ex regulator/rectifier off of ebay, cheap, reliable, can charge the battery and has wires coming off of it unlike the 400ex one. But I need to know what wires are to and from what. I'm assuming the red wire and the green w/ black stripe wire with male and female bullet connectors (respectively) are for the ac voltage from the stator but I'm not positive. And I'm not sure what the three yellow wires go to that are in the round harness. If anyone can help me identify the wiring I would appreciate it, thanks.