playnhard
01-31-2008, 06:51 AM
Any one with a 2007 Eiger may want to read this. If you start blowing ign. fuses take a look at your brake light. If it stays light with out the brakes applied then you are getting a feedback in the system. I recently had an intermittent problem blowing ignition fuses, turned out the switch on the foot pedal was bad. This switch was allowing current to flow through the metal pin that attaches to the spring. When ever the spring would touch the engine it would ground and blow the fuse.
You can replace the switch or simple disconnect it under the seat and weather proof the feed end.
Be Safe,
PlayNhard
You can replace the switch or simple disconnect it under the seat and weather proof the feed end.
Be Safe,
PlayNhard