axle nut

[foxracer5464]

i just got my new g-force axle in and was wondering how tight the axle nut is soposed to be

[NacsMXer]

Tight enough to prevent side to side movement of the axle, then tighten the jam nut. It would be a good idea to junk the POS stock axle nut at this point....you'll save yourself a lot of headaches down the road :o

[hornetgod13]

The stock axle nut is torqued to 65 ft lbs and the large nut that tightens against the brake rotor is torqued to 94 ft lbs.