PDA

View Full Version : drr 50 factory pipe or not



brownieride
01-29-2008, 09:05 PM
do the aftermarket pipes make a noticeable difference or is it wasted money thanks

Nichols Atvs
01-29-2008, 09:20 PM
This is kind of a gray area subject becuase you need to check your rules and make sure your able to swap out a pipe . The stock Drx pipe is a very good all around pipe for a 50 When you make a jump to the 70 is where you will make more use of it you can get different pipes on what your RIDER or engine need One for more top end or one for more mid end and so on. Get your gearing and cluching tooned in with your rider first then you can think about your pipe. Youll see more of a difference with your rider in just good shocks then a new pipe. Just my 2 cents.

brownieride
01-29-2008, 09:34 PM
thanks for the info man my daughter won the arqa 50 stock championship last year and this year she has to move up to the 50 production this year and i just need some ways to get more power im going to port the jug and change the carb and intake
im also going to do some clutch work any tips will help thanks

Logan #34's Dad
01-30-2008, 01:39 AM
Brownieride, here is my tip on a 50cc. Call Marc at Hot Quads.

dblacks
01-30-2008, 06:18 AM
is it legal to do motor mods and change the pipe on the 50 in your series

If so a properly built 50 motor will greatly benifit from a pipe, a stock 50 motor wont have much difference with an aftermarket pipe

brownieride
01-30-2008, 06:21 AM
its atva dirt track i not real sure what all you can do to the motor i was planning on porting the cylinder and maybe some head work if thats legal

bulldogfallon
01-30-2008, 02:38 PM
PM Sent