post your lifted trucks.. or sick truck...

[KXRida]

Originally posted by woodsracer144
OH MY GOD! EVERY ONE WHO IS ***** JUST SHUT THE f BOMB UP, ITS NOT YOUR FIN RIDE THEY CAN THRO 50'S ON IT AND RIG IT UP TO BE A PEDAL TRUCK OR PUT IN FRONT OF A COP AND RUN HIM OVER ITS NOT YOUR FIN RIDE SO JUST DOP ALL THE STUIP **** FOR THE SECOND OR THIRD TIME

Were the caps really needed lol :p

[400exrider707]

Originally posted by KXRida


400exrider707, if your truck couldn't beat a ranger, you need to sell that thing. Give the ranger a few years and if I do a v8 swap, call me.

The cobra on the other hand... I hope your truck runs high 12's, low-mid 13's.

When did I say it couldn't beat a ranger? I said the ranger wouldn't be a problem for me to beat, I wanted to try the cobra! I'm sure your cobra is faster than my truck, but still a fun race. I could dip into high 13's. With more mods than just a programmer I could probably keep up. I used to own a ranger, and high 17 sec 1/4 miles are not what I consider quick by any means! hahaha.

[KXRida]

Originally posted by 400exrider707
I used to own a ranger, and high 17 sec 1/4 miles are not what I consider quick by any means! hahaha.


hell I'd be happy if my ranger made that! :eek2: haha

Yah the cobra is all stock motorwise. Just gears, headers, and flow disasters. I'd still like to do a v8 swap in the ranger though and have it beat the cobra!

:devil:

[400exfan19]

Originally posted by 400ex28
It's not that hard, I did it on my ranger.
i tried puttin the smoked film on and i couldnt get it to fit properly, so i tryed to flatten the big air pockets and the tint like pinched together and left lines stickin out all over the place..it sucked

[400ex28]

Originally posted by 400exfan19
i tried puttin the smoked film on and i couldnt get it to fit properly, so i tryed to flatten the big air pockets and the tint like pinched together and left lines stickin out all over the place..it sucked

They make stuff you can spray on like spray paint.

[coolguy8769]

I decided to test my tires out again, endless amounts of mud!! these tires constantly clean out and never become slicks like my old tires

http://i4.photobucket.com/albums/y141/coolguy8769/DSC02001.jpg

and the old tires..(yes i know about the rope it was just tied on never used to pull)
http://i4.photobucket.com/albums/y141/coolguy8769/081007_17171.jpg

[KXRida]

Originally posted by coolguy8769
I decided to test my tires out again, endless amounts of mud!! these tires constantly clean out and never become slicks like my old tires

http://i4.photobucket.com/albums/y141/coolguy8769/DSC02001.jpg

and the old tires..(yes i know about the rope it was just tied on never used to pull)
http://i4.photobucket.com/albums/y141/coolguy8769/081007_17171.jpg

haha I had tires that did the same thing now my new 35's clean out pretty well also. What kind are they? I want to go wheeling sometime soon, but snow is one thing, ice is another. Ugh ice is no fun at all.

[woodsracer144]

i love the snow, im so use to drivein big trucks in the snow when i take my moms car out its like time to have a fun time! because then i just can go and i can slid and control it and its easy, but if i lose it then im stuck there with the truck i could get out.

[KXRida]

Originally posted by woodsracer144
i love the snow, im so use to drivein big trucks in the snow when i take my moms car out its like time to have a fun time! because then i just can go and i can slid and control it and its easy, but if i lose it then im stuck there with the truck i could get out.

one of the pro's of having a truck. Just remember just because you get going faster doesn't mean you stop faster.

[woodsracer144]

i know, but its easy to drive my moms little car when i have a big old farm truck that im always drivein around, and tractors and *****

[TRX_450]

yep

[tapper1823]

2000 Chevy 1500, tru duals no mufflers, 3" bodylift 2" suspension. 33" dick cepek FCII. Intake, smoked taillights (not in pic) bull bar, grill, chrome door handles, bed cover, whips, led brake light bar, expensive sound system inside, romote start, vent shades, list goes on and its not dont yet, future stuff 6" lift and 38", Programmer, halo lights, full chrome grill.

[tar]

Originally posted by TRX_450
yep
very good lookin duramax you got there! I'll have to get pics of my dads

[Jolseen]

I want to get a black 2008 f250 sometime this spring.

[woodsracer144]

Originally posted by Jolseen
I want to get a black 2008 f250 sometime this spring.

thats sick as hell! oh my lord! that is awsome!

[72 chevelle ss]

Originally posted by Jolseen
I want to get a black 2008 f250 sometime this spring.

Yuck. Those are so ugly.

[Jolseen]

I love the look of the new superdutys:mad:

[tapper1823]

Originally posted by 72 chevelle ss
Yuck. Those are so ugly.

I would have to agree with him on that one! GO DURAMAX

[f1502nv]

did you guys hear that donahoe racing went out of business and was bought out?

[roundsy]

not mine but a few cool ones i snapped at SL last summer

1

[roundsy]

2 "his little truck"

[roundsy]

3 "his big truck"

[roundsy]

4...not a truck but I'm a firebird guy so i thought it was cool

[roundsy]

5 "a project for his wife to get to the beach and back"

[roundsy]

my rig...hauls the quad and gets me to school and back

[woodsracer144]

Originally posted by roundsy
not mine but a few cool ones i snapped at SL last summer

1

i'll be rolling on one of theses when i get out of school!

[woodsracer144]

Originally posted by roundsy
not mine but a few cool ones i snapped at SL last summer

1

i'll be rolling on one of theses when i get out of school!

[atm909]

My 83 Ranger

[KXRida]

Originally posted by atm909
My 83 Ranger


hey another F-50 on the forum haha.

[54warrior]

http://i43.photobucket.com/albums/e367/kartmanaz/prg%20shoot/DSC_6401durkadurka.jpg

http://i43.photobucket.com/albums/e367/kartmanaz/prg%20shoot/DSC_6266durkadurka.jpg


Video: http://www.youtube.com/watch?v=W7S4IApAR7g

[420yfz]

http://i107.photobucket.com/albums/m287/420yfz/n513824744_373480_5139.jpg

http://i107.photobucket.com/albums/m287/420yfz/n513075443_1269914_698.jpg

http://i107.photobucket.com/albums/m287/420yfz/n514077503_170789_461.jpg

http://i107.photobucket.com/albums/m287/420yfz/n560865575_1542893_729.jpg



my mall crawler

[54warrior]

Originally posted by 420yfz
my mall crawler

LOL:D

[TCracin440ex]

my 2000.....6 inch bds suspension, 3 inch body lift, 4.10 gears f/r, flowmaster 40 series exhaust, mb motoring wheels, 315/75r16 bfg all terrains, got 1.5 inch blocks and a 5 inch lifted leaf on the way to fix the sagging assend, and ive also got a predator power tuner

http://i195.photobucket.com/albums/z254/OneBaddAssZ71/bigz71pics004.jpg


http://i195.photobucket.com/albums/z254/OneBaddAssZ71/bigz71pics010.jpg

a lil bit newer dirty pic of the truck

http://i195.photobucket.com/albums/z254/OneBaddAssZ71/truckinsno2002.jpg

[KXRida]

Originally posted by 54warrior
http://i43.photobucket.com/albums/e367/kartmanaz/prg%20shoot/DSC_6401durkadurka.jpg

http://i43.photobucket.com/albums/e367/kartmanaz/prg%20shoot/DSC_6266durkadurka.jpg


Video: http://www.youtube.com/watch?v=W7S4IApAR7g


very impressive! Are you familiar with Herman Motorsports at all? They build dessert trucks. The owner of the company lives about 30 miles from me and he has my neighbor do all the screen printing for his clothing line. About two weeks ago they had a truck brought out here for a few pics. This is the truck they brought out... ofcourse it has full fenders on it now, but man that thing is wild.

http://www.youtube.com/watch?v=ZkCW9qJKD98

Everytime I see that I want to make a long travel truck more and more, but what's the point when you live on the east coast?

[KXRida]

This is one of Perry McNeil's trucks that he runs. I've been following this guy for a little bit and he builds some wild trucks. His ranger is also seen in the movie Dust To Glory. When they start all the trucks it's the blue ranger that flex's out around the first turn.

http://www.mcneilracinginc.com/photo_gallery/Craigs_I-beam_conversion_tacoma/pic01.jpg

If I ever scored some serious cash, a lot of time, and a hydrolic pipe bender (haha I wish) I would love to build up a truck like this.

http://www.youtube.com/watch?v=nyJvjtuzN_8&feature=user

my it's nice to dream haha. That truck now has a v8 in it if I remember correctly. I think they tossed the v6.

[dan harris]

My track truck !

[400exrider707]

Dan, sharp looking truck. Are those mickey thompson beadlocks? I want those in black for my truck, looks good.

[pastfast125]

http://i11.photobucket.com/albums/a177/pastfast125/022508_12151.jpg

[pastfast125]

and a flexxin pic for ya

http://i11.photobucket.com/albums/a177/pastfast125/121207_10002.jpg

[coolguy8769]

ahhhhh my truck will look like that in a year hopefully!!! very nice man!!!

[bens250ex]

my ride.


<a href="http://s238.photobucket.com/albums/ff1/bens250ex/?action=view&current=102_0007.jpg" target="_blank"><img src="http://i238.photobucket.com/albums/ff1/bens250ex/102_0007.jpg" border="0" alt="Photobucket"></a>

<a href="http://s238.photobucket.com/albums/ff1/bens250ex/?action=view&current=102_0006.jpg" target="_blank"><img src="http://i238.photobucket.com/albums/ff1/bens250ex/102_0006.jpg" border="0" alt="Photobucket"></a>

[VIC]

Here's mine
http://i2.photobucket.com/albums/y25/azvizu/PV1.jpg
http://i2.photobucket.com/albums/y25/azvizu/81.jpg

[KXRida]

Originally posted by pastfast125
and a flexxin pic for ya

http://i11.photobucket.com/albums/a177/pastfast125/121207_10002.jpg


man that makes me want to do my SAS even more. I wish I had the funds to do it this summer. Nice looking rig man!

[woodsracer144]

Originally posted by VIC
Here's mine
http://i2.photobucket.com/albums/y25/azvizu/PV1.jpg
http://i2.photobucket.com/albums/y25/azvizu/81.jpg
hey when you put those shocks in it and you put that aftermarket front fender on it. do you haveto do that or what? do you have to remoce that cover thats above the tire also? thanks nice truck !

[KXRida]

Originally posted by woodsracer144
hey when you put those shocks in it and you put that aftermarket front fender on it. do you haveto do that or what? do you have to remoce that cover thats above the tire also? thanks nice truck !


with longer travel trucks, flared glass fenders are usually a must.

They are also good for being able to stuff a tire and not worrying about rubbing on fenders wells. Also... NO RUST!

[woodsracer144]

how much are those?

[KXRida]

fenders or shocks?

I believe my brother's fenders and hood were around $600-700, but where they really get you is shipping, especially for us east coast guys. It was a little over $400 to ship them cross country and they still ended up being damaged. When ohio glass was still in business it wasn't so bad for shipping to the east coast, but the baja market is out west, so what can you do. It all depends who you go through too. If I either build up a long travel truck or build up my ranger atleast one of them will have glass fenders. I'm already searching around for a 2wd ranger/toyota/s10 cheap around here to maybe start a project next summer. All depends what you drive too. For the Gen I and Gen II rangers like I have, you really don't have a selection. You have glassworks and Mcneil racing. Both are great companies, but Mcneil has better prices and IMO better fenders for my style of ranger.

[Moto49X]

Not lifted but here is the Cummins i'm hoping to buy by mid-week if all goes well.

[Moto49X]

2

[woodsracer144]

Originally posted by Moto49X
2

thats a nice truck but your gonna pay for fuel like no tomorrow now!
i wanna put a cummins in my bros 85 chevy scottsdale
nice truck


how much would it cost to put some shocks and fenders on like the 92-96 style f-150?

[KXRida]

Originally posted by woodsracer144
how much would it cost to put some shocks and fenders on like the 92-96 style f-150?

however much you want to spend. All depends what you want.

[Mxjunkie]

kinda crappy quailty, doesnt help I dropped the camera off my garage before we left trying to get a dog toy someone chucked up there.. lol.. :blah:

[450Rchaser]

06 Sierra

[Kickstarts-suck]

:chinese:

http://img257.imageshack.us/img257/4329/0302081643lw6.jpg (http://imageshack.us)

[Moto49X]

Originally posted by woodsracer144
thats a nice truck but your gonna pay for fuel like no tomorrow now!

Yea i know. But, i've wanted a cummins for years so i finally went for it.

[woodsracer144]

i dont know, right now diesels 50 cents more than gas so it could get spendy but most the gas trucks i
ve drove are gas hogs so they spend alot on the gas and you can chip up and get some better fuel in it. it will be a nice ride what is diesel by you?

[capecod400ex]

http://i43.photobucket.com/albums/e398/bryrylan/1230071620a.jpg
http://i43.photobucket.com/albums/e398/bryrylan/DSC00819.jpg
:macho

[Blue250X]

Originally posted by capecod400ex
http://i43.photobucket.com/albums/e398/bryrylan/1230071620a.jpg
http://i43.photobucket.com/albums/e398/bryrylan/DSC00819.jpg
:macho

By the looks of the set-up you have going there, that truck looks like it is used the way it should be, as a truck:cool:

[KXRida]

Originally posted by Blue250X
By the looks of the set-up you have going there, that truck looks like it is used the way it should be, as a truck:cool:


very much so.

Nice rig man. Looks like you do a good bit of towing with it. How's it do?

[Moto49X]

Originally posted by woodsracer144
i dont know, right now diesels 50 cents more than gas so it could get spendy but most the gas trucks i
ve drove are gas hogs so they spend alot on the gas and you can chip up and get some better fuel in it. it will be a nice ride what is diesel by you?

Gas today was $3.09 diesel was $3.39

The ole' 6.0 chevy was only gettin about 13-14 MPG's. Had Dual's, K&N intake, TB spacer, recent tune up. Only pic i can find...

[capecod400ex]

Originally posted by KXRida
very much so.

Nice rig man. Looks like you do a good bit of towing with it. How's it do?


It dose good its not a stranger to having a trailer hanging off the back.

http://i43.photobucket.com/albums/e398/bryrylan/Picture003.jpg
http://i43.photobucket.com/albums/e398/bryrylan/shed.jpg
http://i43.photobucket.com/albums/e398/bryrylan/Picture120.jpg

[KXRida]

That thing looks like a spaceship with all the lights on haha. Hell I'd be half scared to see that coming down the road at me!

Nice truck man. Glad to hear you like it!

[woodsracer144]

Originally posted by Moto49X
Gas today was $3.09 diesel was $3.39

The ole' 6.0 chevy was only gettin about 13-14 MPG's. Had Dual's, K&N intake, TB spacer, recent tune up. Only pic i can find...

yeah that D-max is just like my buddys dads it what we use as a hauler and stuff and she gets about 12 with a trailer, and its got a bullydog programer( i hate it) but she gets the job done,

whats a good chevy gas motor that you could put in a 85 that isnt a gas hog? with EFI mabie?

[KXRida]

Originally posted by woodsracer144
whats a good chevy gas motor that you could put in a 85 that isnt a gas hog? with EFI mabie?


for a direct swap? Probably not much.

[woodsracer144]

any one know how much those EFI kits are by like elborck? nice lit up PSD!

[capecod400ex]

Originally posted by woodsracer144
any one know how much those EFI kits are by like elborck? nice lit up PSD!

Thanks

[capecod400ex]

Originally posted by woodsracer144
any one know how much those EFI kits are by like elborck? nice lit up PSD!

Thanks

[KXRida]

Originally posted by woodsracer144
any one know how much those EFI kits are by like elborck? nice lit up PSD!


somewhere around the neighborhood of $1000 for a full efi kit. You'd probably be better off cross matching something in the junkyard if possible. What do you have a 350?

[LRD450R]

where did you get the rear window flag

[Blue250X]

Originally posted by woodsracer144
yeah that D-max is just like my buddys dads it what we use as a hauler and stuff and she gets about 12 with a trailer, and its got a bullydog programer( i hate it) but she gets the job done,

whats a good chevy gas motor that you could put in a 85 that isnt a gas hog? with EFI mabie?

Well, the first EFI for chevy came in 87 (TBI, throttle body injection..something like a less sloppy carb), which is the same body style as your truck, so you could go junk yard shopping for a whole efi harness from an 87. A 350 would probably be your best bet for an engine, you won't get good gas mileage unless you go into getting custom tunes or do it yourself, which takes alot of learning, but is more than worth it in the end.

[woodsracer144]

Originally posted by Blue250X
By the looks of the set-up you have going there, that truck looks like it is used the way it should be, as a truck:cool: dude the year i getout of high school im buyin a diesel and settin it up like that!
thats sick those are MBRP's right?

the trucks a 85, its a 350 im sure with a TH 700-r? tranny? its not the 350 or 400 turbo trans or what ever it is.

its my brothers truck and its just sitin right now and i think i coudl take him in to sellin it but if he dont i fould a nice 98 f-150 for 7 at a dealer i could take him down some i think

[capecod400ex]

Originally posted by woodsracer144
dude the year i getout of high school im buyin a diesel and settin it up like that!
thats sick those are MBRP's right?



Naahs its the grandrock Y pipe and kit and the diamound plate cover is MBRP and the stacks came from a truck place I buy my lights from and get my CB worked on.

[400EXrider#91]

my old toy...02 silverado 7 1/2 superlift with keys and 35inch nittos with 18" moto metals and a tons of little things. all done in my garage other then the custom bent duals. here she is at the nitto tent at all truck nationals at carlise

[400EXrider#91]

and heres the current whip...06 duramax dually...running the 1/4 in the mid 14's. bought it to hopefully start a hauling business for myself, but the $4.09 a gallon diesel fuel prices have me still just running the company box truck

[416exmx]

Here is one of my lifted trucks. 21" lift on 49's with 20" wheels.

[72 chevelle ss]

Originally posted by 416exmx
Here is one of my lifted trucks. 21" lift on 49's with 20" wheels.

Seen pictures of that truck before. Isn't it still IFS with a 10 bolt? lol

[Gray33]

here is my truck 1998 f150 paid for my self now all i need is a bigger quad

[woodsracer144]

goin to look at a 98 like yours but its a fleet side extended cab and the 3rd door short bod with 112K on it for 7K and im sure i could take them down some more, payin it all out of my own pocket.

[Gray33]

ya, i would want a extend cab but i didnt want all my friend wanting me to take them places my senior year i will probly get a newer truck what kind of mods should i put on her

[woodsracer144]

once i get a truck im throwin a programer in it if its a gas or a diesel, then i'll start with some bigger tires then throw in the motor load on shocks i'll get a exhaust system also for it at the same time as the programer, but i really want the snow to go so i could get some more money rollin in to pull a loan,

i would start with a exhaust and if your in to audio but i've been lookin in to programers and then you and get Hp and MPGs also, but you need to spen some $$ to get a good one i've been lookin on ebay alot lately.

good luck hope you can pimp it out,

[woodsracer144]

Originally posted by 400EXrider#91
and heres the current whip...06 duramax dually...running the 1/4 in the mid 14's. bought it to hopefully start a hauling business for myself, but the $4.09 a gallon diesel fuel prices have me still just running the company box truck

i like your little thing under you username!
nice truck also, im a big cummins and powerstroke guy but a d-max will come in next and as long as she can pour out some black smoke shes good lookin to me.

[KXRida]

Originally posted by Gray33
ya, i would want a extend cab but i didnt want all my friend wanting me to take them places my senior year i will probly get a newer truck what kind of mods should i put on her


dude I couldn't drive without extended cab. When I go riding, I have so much stuff that I take with me. I too got sick of driving people around and what drives me nuts was when I'd flip up the drive seat to let people in the back and it got readjusted. Solved that problem quick and in a hurry... Took the driverside back seat out. Yah if people want rides to the track or something, atleast give me something for gas.

What kind of truck are you getting?

[KXRida]

Originally posted by 416exmx
Here is one of my lifted trucks. 21" lift on 49's with 20" wheels.

If that thing took one hard bump off road (judging, that it may have seen offroad time) you'd probably rip all the fenders off along with the bed and most of the front end. IMO I'd scale down to like 37's at most. Get something that fits in the wheel wells and you can actually flex with.

[woodsracer144]

Originally posted by KXRida
dude I couldn't drive without extended cab. When I go riding, I have so much stuff that I take with me. I too got sick of driving people around and what drives me nuts was when I'd flip up the drive seat to let people in the back and it got readjusted. Solved that problem quick and in a hurry... Took the driverside back seat out. Yah if people want rides to the track or something, atleast give me something for gas.

What kind of truck are you getting?

im gettin a 98 ford f-150 with a 4.6 in it, i wish it had a 5.4 in it but oh well,

yeah, the haulin people around endin in the 3rd week of me drivin, people used me and i said **** you guys i dont care who it is if you want a ride you pay me some money to drive you and i dont care if im goin to the same place your payin me, and people are like what and i said i dont care, and then this chick(my buddys GF ) wanted me to give her a ride home(shes the reason this happened also) and i said no, she lives right on my way home and i wouldnt take her and she really pissed me off mabie im low and all that but i dont care and another thing is when i wanna go once my truck starts the wheels are turnin around so you better be in it before start.... i whipped out the law!

[KXRida]

Gas, grass, or *** no one rides for free haha. I heard that saying from someone before. Well it all depends on the girl too haha. Girls in short skirts + lifted trucks = umm views? haha lifted trucks do have their own perks.

Yah I'm not much into giving rides for free anymore. My truck is not someone else's leisure ride. I only really let my good friends ride with me to the tracks and stuff because we car pool when we go to the tracks. Instead of taking like 8 trucks, we'll just get a few trailers or put two bikes in one truck and take 4 trucks. I still try to give my friends some money for gas because I know how it feels when you're hauling someone else's stuff around for free.

[VIC]

Originally posted by woodsracer144
hey when you put those shocks in it and you put that aftermarket front fender on it. do you haveto do that or what? do you have to remoce that cover thats above the tire also? thanks nice truck !
At least on mine the whole fender and cover above the tire was removed and a different fender support was fabbed. Fuse box and coolant overflow were moved up too. You can get away with leaving the inner core or well depending on the kit and travel your trying to get. The Fiberglass fenders allow for much bigger tires without having a big lift, keeping stability. My truck is not that much higher than a stock 4x4 truck and I'm running 37's. I try to get a picture of from inside the hood.

http://i2.photobucket.com/albums/y25/azvizu/4.jpg
http://i2.photobucket.com/albums/y25/azvizu/fotos2007005.jpg

[Jolseen]

here is a another nice 08 f250

[underpowered]

my truck. 2003 silverado Z71. pretty plane jane.

http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6371.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6376.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6368.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6380.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6383.jpg

just put these on it today
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT7829.jpg

[troyleepred719]

Originally posted by underpowered
my truck. 2003 silverado Z71. pretty plane jane.

http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6371.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6376.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6368.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6380.jpg
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT6383.jpg

just put these on it today
http://img.photobucket.com/albums/v690/redneck409/Truck/PICT7829.jpg


Your underpowered on FSC right?
or am i crazy... and already asked you this once....

[underpowered]

Originally posted by troyleepred719
Your underpowered on FSC right?
or am i crazy... and already asked you this once....

yupp. same underpowered as on FSC. i surf there alot more than i do here.

[400ex28]

Truck I had for 3 days :(

http://i18.photobucket.com/albums/b132/TCracin416ex/nice.jpg
http://i18.photobucket.com/albums/b132/TCracin416ex/ddaf.jpg
http://i18.photobucket.com/albums/b132/TCracin416ex/adfa-1.jpg
http://i18.photobucket.com/albums/b132/TCracin416ex/HPIM5369.jpg
http://i18.photobucket.com/albums/b132/TCracin416ex/HPIM5383-2.jpg

[coolguy8769]

why only 3 days?

[redsurdaddy]

the trucks i have now. ones a dd, ones a wheeler and the other is street machine/sometimes mudder/mostly poser :D

here's the DD, i've got 33's on it now but no pics yet
http://farm4.static.flickr.com/3133/2386513976_1d8033c6a8_b.jpg

the wheeler
http://farm3.static.flickr.com/2420/2089259011_01ddf7738d_b.jpg

and my Blazer
http://farm3.static.flickr.com/2157/2089253709_a92e1f5d60_b.jpg

[underpowered]

nice Heep.

here is mine.

http://img.photobucket.com/albums/v690/redneck409/The%20Heep/Jeep025Large.jpg
http://img.photobucket.com/albums/v690/redneck409/wheeling/DSC_6523.jpg

and my old truck. w 33's
http://img.photobucket.com/albums/v690/redneck409/544e6580.jpg

[Mxjunkie]

Nice day today :cool:

[Moto49X]

:eek2:

Diesel = $4.39

Full Tank if empty = $150

Its worth it. My solution for a fuel saver is a Harley, haha, not saving me any money at all.

[trx400EXtreme]

we have the same mower lol^^^. (the super Z)

[tgreenz400]

Originally posted by trx400EXtreme
we have the same mower lol^^^. (the super Z) Put Mike's on here.

[trx400EXtreme]

Originally posted by tgreenz400
Put Mike's on here. lol i wish i had a picture of it. i'll try to get one next time i see his truck. i'll try to create a picture with words..... imagine a big red dodge 3500 dually(sp) with dual stacks, a wing on top, Alaco ten lug conversion semi wheels and tires.... and not to mention it's pushin about 800 horses.:devil: he got pulled over a few weeks ago for taking off at a stop sign(not speeding) and leaving a cloud of black smoke that took every bit of 5 minutes to clear lol.

[redsurdaddy]

thanks underpowered, that picture was taken on widowmaker in KY


here i'm on carburetor hill


http://farm3.static.flickr.com/2320/2089257321_d190c7c76a_b.jpg

[underpowered]

Originally posted by redsurdaddy
thanks underpowered, that picture was taken on widowmaker in KY


here i'm on carburetor hill


http://farm3.static.flickr.com/2320/2089257321_d190c7c76a_b.jpg

i plan on making it down there to the slade/natural bridge/red river gorge area one day to take mine out.

carb hill looks like a blast to play on.

[GPracer2500]

This isn't mine. It belongs to duning acquaintance of mine. It's a pretty mean truck.

F650 with a Cat.
http://i34.photobucket.com/albums/d133/gpracer2500/Dumont/P1120069Large.jpg

http://i34.photobucket.com/albums/d133/gpracer2500/Dumont/P1120020Large.jpg

It makes my little setup look positively rinky-dink!
http://i34.photobucket.com/albums/d133/gpracer2500/Dumont/P1120021Large.jpg

[redsurdaddy]

it is, air down and you'll make it up no problem, you have enough flex that you won't need lockers

[underpowered]

this summer sometime i need to make a trip down there. after the motor swap in teh Heep of course.

But i got a rear locker anyhow, and by the time i make it down tehre, should be flexing better as well.

[FourFiftyFour]

One of my latest addictions has been taking this beauty to the car shows around here. It swept all Best Of Shows in every local Houston area show last year, was pretty fun! '51 Ford F1, but dont worry Chevy boys, it has a Chevy heartbeat, with a 502 in it. =) The rears are 15x20. Has ghost flames (cant tell in the picture), paint is PPG Candy Brandywine. Custom interior...it is definitely a lot of fun!

http://img.photobucket.com/albums/v473/MotoXQuadChick/100_0886-1.jpg

http://img.photobucket.com/albums/v473/MotoXQuadChick/100_0893-2.jpg


http://img.photobucket.com/albums/v473/MotoXQuadChick/100_0888.jpg

[redsurdaddy]

That's sick FourFiftyFour!

[300EXrider356]

Originally posted by trx400EXtreme
lol i wish i had a picture of it. i'll try to get one next time i see his truck. i'll try to create a picture with words..... imagine a big red dodge 3500 dually(sp) with dual stacks, a wing on top, Alaco ten lug conversion semi wheels and tires.... and not to mention it's pushin about 800 horses.:devil: he got pulled over a few weeks ago for taking off at a stop sign(not speeding) and leaving a cloud of black smoke that took every bit of 5 minutes to clear lol.

Dude I saw that truck while I was at baseball practice at the fields on Kennith road. It would be BA if it didn't have that huge chrome wing on top.;)

[RATPACK Z400]

Heres my babys!

[trx400EXtreme]

Originally posted by 300EXrider356
Dude I saw that truck while I was at baseball practice at the fields on Kennith road. It would be BA if it didn't have that huge chrome wing on top.;) i guess it's a pretty popular truck around the KC area lol. and yea, i agree, the wing looks kinda goofy on it.

[APK400exRacer]

My rig:
94 F150 6" 35's + lots more

Over summer it will be getting an SAS with 12" of lift and 38s.
http://img.photobucket.com/albums/v640/lakemarykid/IMG_2696.jpg
http://img.photobucket.com/albums/v640/lakemarykid/random%20too/IMG_3034.jpg

-Curtis-

[Kickstarts-suck]

Originally posted by APK400exRacer
My rig:
94 F150 6" 35's + lots more

Over summer it will be getting an SAS with 12" of lift and 38s.
http://img.photobucket.com/albums/v640/lakemarykid/IMG_2696.jpg
http://img.photobucket.com/albums/v640/lakemarykid/random%20too/IMG_3034.jpg

-Curtis-


wow nice truck!

Very cleeeeean :D

[underpowered]

Originally posted by APK400exRacer
My rig:
94 F150 6" 35's + lots more

Over summer it will be getting an SAS with 12" of lift and 38s.
http://img.photobucket.com/albums/v640/lakemarykid/IMG_2696.jpg
http://img.photobucket.com/albums/v640/lakemarykid/random%20too/IMG_3034.jpg

-Curtis-

what axle are you using? a d60 out of a 250? plan on wheeling i assume? the TTB front end had to be one of fords worst idea's ever.

[woodsracer144]

goin to look at a dakota this weekend, its a 94? 5 speed 700 bucks. ex cab
these trucks good?

[tman12345]

Originally posted by woodsracer144
goin to look at a dakota this weekend, its a 94? 5 speed 700 bucks. ex cab
these trucks good?
my friend has the 3.8 v6 and it really hauls some balls.

[trx400EXtreme]

Originally posted by trx400EXtreme
i guess it's a pretty popular truck around the KC area lol. and yea, i agree, the wing looks kinda goofy on it. heres the only pic i have of it. its a cell phone pic from last night. kinda small.

[APK400exRacer]

Originally posted by underpowered
what axle are you using? a d60 out of a 250? plan on wheeling i assume? the TTB front end had to be one of fords worst idea's ever.

No D44 out of a 79' F150. I don't really wheel it, the occasional mud hole or when someone needs to be pulled out. Yes TTB SUCKS!

-Curtis-

[KXRida]

Seeing how a TTB 35 will flex just as good if not better stock for stock to a solid axle, I'd say ford really screwed up on that one didn't they? :o The weakest part of them are the shafts/ujoints. If you do a fair amount of wheeling, buy CTM shafts and u joints. Lifetime warranty on them. Also, put 4 tack welds on each u joint cap to keep the caps from walking out. This is what usually leads to broken shafts. Only tack them in, incase you need to replace the u joint you can just grind the welds off.

If you don't really plan on wheeling, save yourself the money and the time and just keep your traction beam. It probably wouldn't be worth it to do all the work to it and have a truck that drives like crap. After I'm done with school my truck will be a trail truck only being trailered to the trails. Once I receive my stimulus package I'll putting in a D35 up front and an 8.8 out back to swap out the tiny stock D28/7.5. I'm just waiting on the check so I can order my gears and install them.

http://i191.photobucket.com/albums/z152/Rmrider125/truck-1.jpg

yah they can't flex at all :confused: