View Full Version : Winter Rebuild Part 2...
honda300EXtreme
01-25-2008, 04:52 PM
Since the other thread was getting cluttered up i figured ill make a new one.
Heres what the plans are:
-steering stabalizer
-aftermarket front shocks
-maier hood
-fully built head by C&D, +1mm vavles, port and polish, new valve
seals, and heavy duty valve springs,
-450r swinger
-four stroke tech 330 kit,
-four stroke tech or curtis sparks cam
-250r rear shock
-g-force axle
-rad lock nut
i might also get a 39mm fcr carb but i need to get some feedback about doing this though,, and i might take some 400ex footpegs and make them work,,
it should definatly turn out nice when its done,,
heres what it looked like before i tore it apart
honda300EXtreme
01-25-2008, 04:58 PM
heres what ive knocked off the list so far
i bought a denton steering stabalizer,
a maier carbon fiber looking hood
works tripple rate front shocks with remote rezzys
i also got
450r swingarm
250r shock
rad lock nut
so im pretty much down to engine work and reassembly,
heres some more pics
ridered92
01-25-2008, 05:16 PM
it looked sick before its going to be sicker now let see some pics
honda300EXtreme
01-25-2008, 05:23 PM
old front end
honda300EXtreme
01-25-2008, 05:33 PM
heres some pics of it all torn down,, and with new front shocks
honda300EXtreme
01-25-2008, 05:38 PM
another
honda300EXtreme
01-25-2008, 05:42 PM
heres a pic of all the parts i tore off
honda300EXtreme
01-25-2008, 05:49 PM
heres a pic of the works front shocks all mounted up
honda300EXtreme
01-25-2008, 05:58 PM
heres a pic of the rear end mocked up in place i still have to weld the brackets on and i need the tube that the pivot bolt goes through
but it definatly lines up better than the 400ex swinger i was using previosly
honda300EXtreme
01-25-2008, 06:09 PM
ill work on more pics,, i got my hood on and the engine torn aparts,,
and i have been working on cleaning up the frame and polishing the cases and claning up the motor
please feel free to comment
JIMFROMTEXCO
01-25-2008, 07:41 PM
were do you live in western pa? im gonna be buying equipment to start powdercoating within the month if your interested. my prices will be cheap if i like the outcome i do on my quad. ill post pics up when i do some of my own parts and let you decide tho. im in erie
honda300EXtreme
01-25-2008, 07:51 PM
yea i would like to get some power coating done, i myself am planing on getting into it within the next year,,
i live in the bottom left corner in pa
my zip is 15323
yea if it turns out good let me know im definatly interested, and i wouldnt be looking for anything to complicated,
yea man thanks for the offer, and once you make some prigress be sure to let me know
Y2daT420
02-16-2008, 12:27 PM
Sweet Quad ......Any stock parts 4 sale my 250x could use one of everything lol:D
Y2daT420
02-16-2008, 12:29 PM
how much $$
honda300EXtreme
02-16-2008, 05:03 PM
Y2daT420
pm sent
honda300EXtreme
02-21-2008, 06:01 PM
ok finally some updates,,
if anyones still paying attention :p
i welded on the linkage tabs,, got the rear end bolted in,, got the shock and rezzy mounted,
i pulled the motor out,
and i got the front end tore apart again, cuse i just bought a lonestar anti-vib stem, and burguard +1 400ex a-arms,,
i didnt plan on this stuff but i couldnt resist,,
so that just leaves me with the motor and a axle,,
and a few powdercoated pieces, such as my outer side cases, and motor mounts and some other misc. things
ill get some pics up soon
NPelletier
02-21-2008, 07:27 PM
nice man. looks like you have anice little list of presents for her:devil: but it needs a bath lol :blah:
honda300EXtreme
02-22-2008, 02:04 PM
haha you aint lying,, i got it pretty clean but theres still some more to do
honda300EXtreme
02-22-2008, 05:24 PM
heres some more pics,
heres one of the hood, this is before i did all the "fine detail work"
honda300EXtreme
02-22-2008, 05:28 PM
another
man i need to start using photo bucket.. :p
honda300EXtreme
02-22-2008, 05:31 PM
heres one with the motor out,, yea i know the paint on the frame is terrible,, i need me some PC'
and now stuff is starting to rust, because it has been sitting too damn long :grr: :p
hondarider101
02-23-2008, 12:10 PM
while you have it apart why dont you pc it?? j/w
honda300EXtreme
02-23-2008, 04:41 PM
mainly because i dont have the money to do so,,
and the project is already going to take longer than expected,, but dont get me wrong if i could have it done i would
riderssb250x
02-23-2008, 09:28 PM
hey man wat heel guards are those u got on ur 300, and nice quad by the way i like wat u got in it for the project i have a 250x its got some goodies
honda300EXtreme
02-24-2008, 04:28 PM
those are 400ex ims heel guards, i like em' alot, and they werent to hard to bolt up,
Brian1487
03-03-2008, 07:16 PM
can you post pictures on how you welded up your brackets for the rear linkage. i plan on putting my 450 swinger on the 250 when i get a new one for the 450
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.