DRR front end widths

[Perazzimx14]

I was just reading the thread about air cooled verses liquid cooled It was suggested buying a 70cc and convert it to a 50cc so you have the wider 44" front end.

I just went out and measured the front end on my daughters DRR 50 and it measures 44" to the outside of the front tires. Did I get lucky and the factory dropped a 50cc motor in a 70/90 frame or does the DRR 50 also come in a 44" width?

Lance

[bulldogfallon]

We ordered some that way and the factory made some more like that....so you could be one of the lucky ones

Lucky if your not running an ATVA 50cc event (max is 41" wide)


Does your swingarm have 2 horizontal supports by the shock mount or just one?

That will tell you...Wider a-arms= Longer swingarm

[Perazzimx14]

Gary,

I looked this morning and the swing arm does have the two 2" long gusssets/bracing right in front of the shock mount.

We do not race so I did luck out with the wider/longer wheel base.

Thank you for the help,

Lance