Pro Design Killswitch hookup HELP!!!!

[WB450r]

so i got a pro design kill switch and ive had it for about 2 weeks and need help hooking it up...
i think i no where the coil is but not sure..and where can u put the ground wire at..cant find a place...

can sumbody post pics up of where the coil is and where u put the ground wire at...

THANX

[CSR400EX]

just splice it into your key switch. splice the wire coming out of the metal cap into the green wire on your switch, and the other wire to the black wire with a white stripe. hope this helps

There are 4 wires coming from the key switch. A green, black, red and a black with a white stripe.

You slice the wire coming out of the plunger of the kill switch to the black with a white stripe.

You splice the wire coming out of the metal part of the kill switch to the green wire.

If you get rid of the key you need to splice the other 2 wires together so the fan will work.

Good Luck

[bloodmoney23]

very easy....exactly what TRX just said.

[WB450r]

thanks for the help guys..i jus got dun putting it on...