PDA

View Full Version : houser crf 450 airbox



lil rippers dad
01-14-2008, 08:27 PM
anyone have any ideas for a air box ours runs the no link on the rear and it tears the stock box up thx

koh0001
01-19-2008, 06:16 PM
I have 2 Lonestar no-links and I had to build my airbox and intake tube's. The box hit my rear brake And shock. Also I couldn't get enough air to my motor through the stock tube with a extension. Here's the first one I built.

koh0001
01-19-2008, 06:19 PM
This is what I started out with.

duneflyer1
01-22-2008, 12:25 PM
I too was running the stock airbox, but got tired of not getting enough air, so I just eliminated it. But I dont run in hte mud or water either...just SAND!

lonestar 426
01-22-2008, 01:56 PM
hey koh0001 what pipe do you have on your lsr i fit perfectly
:eek2:

xrxmxcx
01-22-2008, 02:12 PM
on both my yz's i have yoshi pipes that filt prefectly with not modding, alli did was cut the header a little because they were long but they bolt right up and have a moveable clamp

koh0001
01-22-2008, 05:48 PM
Rossier, ATP did have to fab up the head pipe to fit the CRF.