trailers

[06YFZ450SE]

Iam looking for a trailer.What size should I get and should I get a inclosed or open.Iam going to be keeping the quad on or in the trailer at all times.Iam going to make it a shead for the quad too.Thanks.

[54warrior]

A 12' enclosed trailer.

[beaker1214]

For one quad I would say a 10 ft would be plenty but I think I would go ahead and get the 12ft for the extra space and really there usually isn't a big price difference bc of the length of the wood anyways (multiples of 4ft). We just bought a 14ft but could of got a 16ft for just a tad bit more but we really didn't need one that big, we keep our rhino in ours all the time. That way all we have to do is hook up and go where ever we want.

[06YFZ450SE]

Thanks for the pic. Ya its for a YFZ450.

[beaker1214]

Thanks, It all really depends on a few things for example....if u want to be able to haul two quads....room for gear.... stuff like that. just for a 450 though I would think that a 10ft would suit you better because U figure that a 450 is roughly 6 ft long so that would still give you four feet for whatever or if u get a seven foot wide trailer you should be able to get 2 in there sideways.

[jherbie28]

depending on what you are pulling it with and how much you have to spend, look at a 8x16 is a good inclosed trailer that you should be able to find new with lots of upgrades for about $4-5k good luck but the trailer you get will never be big enough it seems like

[TWISTED DINLI]

Originally posted by 54warrior
A 12' enclosed trailer.

thats what i have

[06YFZ450SE]

Thanks for all the replys, I have a 2001 Dodge Ram 360ci,Auto,410-456 gears with 35" tires 6.5-7" lift and room for 37s. Iam wanting to make my quad wider probally +2 but no more than +4. It will be for 1 Quad. Should I make it any longer too..

[jherbie28]

if your gonna race or ride track you will want a +2 front end and axle, when they say +4 its 2 on each side:p good luck with the trailer i also have a set of walsh arms if interested for a yfz450

[06YFZ450SE]

Originally posted by jherbie28
if your gonna race or ride track you will want a +2 front end and axle, when they say +4 its 2 on each side:p good luck with the trailer i also have a set of walsh arms if interested for a yfz450

I now +4 is 2" on each side. All I do is ride tracks and iam gonna start racing this year at a local track. Will the a arms fit an 06YFZ450. Just the a arms no tie rods,

[parkers30]

If you are wanting to make you quad wider you will need a 6' wide enclosed trailer (if an enclosed it what you want) This is because of the door opening, most 5' trailers have a door right at 4'.

[JJs450r]

i have a 6x12 enclosed kinda wish i went bigger

[Scro]

If you are not worried about winddrag/gas mileage, make sure you get one that you can stand up in. Your back will thank you later.

[mittman]

enclosed we have one for work and it has outlets in it dont really need one with outlets but its good if you want to plug in an aircompressor or something

[06YFZ450SE]

Thanks for the info.

[jherbie28]

yeah man, just let me know through pm please:)