My 400ex build up!

[Quicklsvtec]

Well I just started up on this site and got plenty of info from reading all the posts on here. Much thanks to all of you!

Well here is what is going on though got my 02 400ex back in August and not too long ago my friend said he would have it powdercoated for free! Well its getting done! I am going black on black been tearing down and I figured I would post here so everyone could see the progress. I will have pictures up all the way through the build as well.

Here are a couple pics of the frame and stearing stem getting ready to go for the powdercoat.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000577.jpg
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000579.jpg
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000578.jpg

All The Bolts, Nuts, and anything else baged up and written with where they went. Makes it so much easier for reassembly!

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000582.jpg

Some of the polished up parts to go back on.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000591.jpg
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000585.jpg
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000583.jpg

Next is the oil tank that are black as well.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000587.jpg

That is it for right now, let me know what you think. I am going to put some maier black plastics on it. Thinking a with a white tribal decal going down the side... not over the top but to add a little something.

Thanks Nic

[tar]

that will look good..welcome to the sight

[Quicklsvtec]

Thanks man! I just got everything done at the powdercoater. Take a look and tell me what you think!

Peace Nic

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000615.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000613.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000610.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000608.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000607.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000606.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000604.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000603.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000602.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000600.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000599.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000597.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000595.jpg

[Brauap]

Nice PC! Love it! The only thing I would have done differently was get like a billet shifter and brake pett, just to make it kind of stand out, and add a little Bling-Bling.. But just my little 2 cents! Also, what color was that PC? And do you think you could hook me up too?;) Hope it turns out sick! Got any pics before you started? And make sure to keep us updated!

Good-Luck!

[klutch]

Make sure to get a nice Hood to go on the plastics would look sick.

[blac00si]

Originally posted by 416exfreak
Im pretty sure it looked like a stock colored 400ex...

You know...a grey/silver frame...some rust, dirty....the norm.:ermm:

:D Someone understands me.

Before
http://a190.ac-images.myspacecdn.com/images01/104/l_f27ecc5dce1c8ebfd7bbc5b02b741dd5.jpg

:devil: Hey it does look like a stock colored 400ex. :devil:

[Quicklsvtec]

Thanks guys this will be an on going thing! And for that whole bling bling thing from Brauap... Um no. Its going to be all black with some accents. Troy thanks for the original pic, I think that shows a stock 400ex pretty well.

Peace Nic

[440challenger]

looks good black crinkle.........

***DELETED***

[TRXRacer1]

Don't take this the wrong way because I know how good it feels to rebuild a machine but did you request that wrinkle finish?

[tman12345]

should look good when it's done

[Quicklsvtec]

Originally posted by TRXRacer1
Don't take this the wrong way because I know how good it feels to rebuild a machine but did you request that wrinkle finish?

Well the guy that was doing it was sugesting going that route to help hide the imperfections in the welds. I am liking it though... plus is should be much more durable that regular powdercoat.

[400ex28]

Looks good man, it looks like it would be harder to clean mabe?

[Rip_Tear]

Looks good, why don't you get those parts you polished clear coated with gloss PC then you won't have to polish them again.?

Looking forward to seeing it back together!

[hornetgod13]

I love it! Makes me want to paint my frame even more. Keep the photos coming.

[TRXRacer1]

Originally posted by Quicklsvtec
Well the guy that was doing it was sugesting going that route to help hide the imperfections in the welds. I am liking it though... plus is should be much more durable that regular powdercoat. Durability shouldn't really be any different but if wrinkle finish was what you were going for it looks like a good job.

[Quicklsvtec]

Well durability will be different. The wrinkle powder as a thicker base. Which in turn will make it a little tougher to the little scratches and such. No matter what I think it looks pretty good so I am happy.

[Sandman69]

Good lookin.... Keep those pictures coming as you put it back together

[Quicklsvtec]

Well I have been down with a stomic Flu for the last week or so, but I just got back on the quad. Right now I am taking a break from working on the A Arms doing some stripping then some painting. Here are a couple of pics of work from today.

This is the paint stripper and an A Arm showing how well it works.
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000617.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000618.jpg

Here is the steering stem installed

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000616.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000619.jpg

[TRX-330]

do you just brush on the stripper n watch it do its work?

[Quicklsvtec]

yeah just brush it on and does not take much time at all. Then just take a wire brush and it peals right off.

[Ruby Soho]

the days of stripping paint are over for me

and i couldn't be happier.

i still have a can of that stuff in my garage with only a little bit left in it

thats strong stuff

[Quicklsvtec]

Your telling me I got some of it on my arm and burned to all hell. That stuff works though!

[blac00si]

dude, your bike is going to look like when you get it back together. :p

Any updated pics?

[Quicklsvtec]

Well I have been working here and there on the quad nothing really that major has gotten done for a bit... Recieved almost all the bearings and swing arm bolt through the mail. Still waiting on the stainless steel bolt kit to get here so I can actually start the reassemble. But here are some pics of what I actually work on today.

Did not know that the stock exaust could shine... I know it will not last but it will look good for a bit on there.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000621.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000620.jpg

[Pipeless416]

Originally posted by Quicklsvtec


Did not know that the stock exaust could shine... I know it will not last but it will look good for a bit on there.



:eek2: :eek2: :eek2: how exactly did you do that!? i had mine to a near chrome look, but nothing like that. and you're right, it doesnt last haha.

[Quicklsvtec]

Originally posted by Pipeless416
:eek2: :eek2: :eek2: how exactly did you do that!? i had mine to a near chrome look, but nothing like that. and you're right, it doesnt last haha.

Just a buffing wheel and some compound... and a little time doing it.

[blac00si]

thats looks sick!!!!!

i hope you get your bolts soon.... I wanna go ride. David and I are waiting.


:)

[Quicklsvtec]

Alright Well I have been waiting for awhile to get some things in the mail. Well they finally showed up!

Stainless steel bolt kit.
Swing Arm Bearings
Front hub bearings
Swing Arm Bolt

I started putting things together finally and it should be flying from here! Check the pics.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000629.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000628.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000630.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000627.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000624.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000625.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000626.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000623.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000622.jpg

Peace Nic

[Rip_Tear]

looking wicked stealth, I'd get those springs done wrinkle black too... Looks good though keep wrenching!

[Quicklsvtec]

Originally posted by Rip_Tear
looking wicked stealth, I'd get those springs done wrinkle black too... Looks good though keep wrenching!

I dont think I will I want to throw them in the trash. Just trying not to spend a **** load on shocks. Just waiting for a pair of 450R's that are not jacked up in price.

[damon#6]

hey looks good bro but what i would of did was get the a-arms diped in crome so there nice and shiney. u alwas need some crome on ur bike

[Quicklsvtec]

Well those stock arms are going to go soon enough they are just there for the time being.... Wanting to throw some plus 2's on there. They will probably end up being black as well though.

[Quicklsvtec]

Well engine and swingarm went in... I could not get it extreamly clean like everything else but I just am ready to go and do some riding! Here are some more pics.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000664.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000663.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000662.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000661.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000660.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000659.jpg

[damon#6]

i want to do that to my 400ex too i got evrything off of it i have my motor at the shop gettin a 416 in it stage2 hot cams and more so i think i am goin to pant my fram too. i want to paint it carriy red and dip my a-arms and axcel in crome with yellow plastics , i have seen a 400ex like that and its sick !what u think about that??

[Quicklsvtec]

Nice Nice My friend was talking about that just with white plastics. I still need to do work to my engine that will come over time. I just started on this cause someone offered to do the frame for free so I jumped on it. I would say do it though when you already have that engine out!

Peace Nic

[Quicklsvtec]

Well it is getting close. I am about to get ready to drop in on some rubber! The Axel is in fully assembled, the shock and shock linkage are assembled, and the drive sprocket is on.

Check out the new pic!

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000669.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000668.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000667.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000666.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000665.jpg

Peace

[tdmopar59]

looking good!!! cant wait to see that thing all finished up! should be sick!

[Honda#4]

Looks awesome, can't wait to see it done.

[shockwave95]

Looks really good, Make me want to do mine.

[Ruby Soho]

looking real good!

[damon#6]

looks sick man.. but i just got my motor back sooo. what i am goin to do is just take my motor out like 3 weeks befor summer ends and paint it my self and then get the a-arms crome for nexted summer

[Quicklsvtec]

Sorry I posted those pics on my friends name. Switched back over here are the pics again.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000674.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000673.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000672.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000671.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000670.jpg

[hornetgod13]

My Wife really doesn't like you because evertime I see your powder coated frame I keep talking about doing mine. That's really the last thing I'd like to do to mine. I'm truely envious of you. I can't wait to see the completed project. I think you have a future QOTM there.

[honda_runner]

looks tight! I can't wait to see it with plastics and wheels!

[Quicklsvtec]

Hey thanks guys and too bad I am upsetting your wife... that seams to happen alot. LOL Well Yeah I cant wait to see it with some plastics on it as well. Putting the oil system in and the electrical today. Having an aluminum airbox coming as well this week. Have some new pics up later tonight.

Peace Nic

[Exrider434]

Originally posted by Quicklsvtec
Sorry I posted those pics on my friends name. Switched back over here are the pics again.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000674.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000673.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000672.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000671.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000670.jpg

how did you polish your header like that?:p

[honda8&3]

nice project man keep it up!:cool:

[Quicklsvtec]

how did you polish your header like that?:p

You do that with a bench grinder/polisher with a polishing wheel on it. Get your self some polishing compund which is made for hard metals... (Steel and such). Then just spend a long time sitting in front of it!

[hondarider101]

where did u get that bolt kit and how much was it???

[Quicklsvtec]

Originally posted by hondarider101
where did u get that bolt kit and how much was it???

I got it off ebay, there are a few people that sell them. kinda disapointed on what actual bolts came with it though. I have had to polish alot of mine myself so far.

[Quicklsvtec]

Well I got a few things put on the quad... I am really getting stoked to get this thing completed! Went and checked out getting my new plastics and should be buying them in a week or so. Check out the pics all that is reall left is wiring then gas tank and plastics!

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000681.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000684.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000685.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000687.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000691.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000689.jpg

Looming the wiring with heat shrink.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000690.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000692.jpg

[mooseracerX]

Thats some nice looking PC you got there. I took my 400 all a part this winter and painted the frame, a-arms, etc. I can't wait to see the final project.

[Ruby Soho]

awesome polishing job

[Quicklsvtec]

thanks guys I am hoping today to be able to get the thing wired up all the way. I am having to extend some of it because of doing the heat shrinking and looming to the wiring, but I think it will be worth it.

[Quicklsvtec]

No new pics but the aluminum air box is all wired up. The thing I want to post about though is that My new maier black plastics are ordered and on their way! I should have the final pictures up soon enough! I am Stoked!

Peace Nic

[mooseracerX]

Did ya get her done yet?

[400exrapes]

there was once a long time ago a poor mans buildoff, a competition for people with not alot of money into there quads but time and effort trying to compete and i think you could have gone a long way or wonthat competition this thing is mostly stock but still very nice and the time you spent on it was a good investment.

[Quicklsvtec]

Originally posted by 400exrapes
there was once a long time ago a poor mans buildoff, a competition for people with not alot of money into there quads but time and effort trying to compete and i think you could have gone a long way or wonthat competition this thing is mostly stock but still very nice and the time you spent on it was a good investment.

That would be pretty cool to do. That might be something for this site to bring up kind of like quad of the month. It might get people that think they have to spend alot of money, to figure out its just time you need.

Anyway I have been pretty busy with work so I havnt spent hardly anytime on the quad. I recieved my blakc maier plastics but am needing to send them back. The front fender came and was pretty much paper thin in one area... I am rather irratated about the whole situation. They are going to replace it though. I will put some new pictures up this afternoon though.

Peace Nic

[Quicklsvtec]

Well here are some of the new pics of the quad. Only have the rear on cause I have to send back the front. After the first time I started it the header polish didnt last and turned to that bronze color... which still looks pretty sick I think. Still having to put a few more little things on and some other little things before I think it is ready to take to the Dunes. Anyway here they are!


http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000699.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000700.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000701.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000704.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000702.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000703.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000705.jpg

Peace Nic

[hornetgod13]

Looking good!

It might be a good time to replace those rear tires. They look pretty worn out.

[Quicklsvtec]

Originally posted by hornetgod13
Looking good!

It might be a good time to replace those rear tires. They look pretty worn out.

Oh those tires are destroyed! LOL I have my paddles to put on it though. They definatly need to be replaced as soon as I go trail riding again. Right now its just something it can sit on while I get it ready.

[mooseracerX]

Originally posted by Quicklsvtec
That would be pretty cool to do. That might be something for this site to bring up kind of like quad of the month. It might get people that think they have to spend alot of money, to figure out its just time you need.

Anyway I have been pretty busy with work so I havnt spent hardly anytime on the quad. I recieved my blakc maier plastics but am needing to send them back. The front fender came and was pretty much paper thin in one area... I am rather irratated about the whole situation. They are going to replace it though. I will put some new pictures up this afternoon though.

Peace Nic
Thats amazing, the orange plastic I bought was some of the strongest plastic I've ever seen. I look forward to see that black beast once you get it done. The only thing is all that black looks like it would be hard to keep clean.

I just have to know what exactly you used to polish the exhaust? I have used cleaners, sanding, and fine steel wool but it never came out looking anything remotely like that. It looks amazing. I dont have to worry about mud stains because if I run into mud I tip toe through it lol or I whip it around and go back another way.

[Quicklsvtec]

Yeah man well with the exaust most of it is time you spend... I started out by cleaning it good. After I took 320 grit sand paper up to 600 afterward. Then it moved into a grinder with a buffing wheel put on it. You take a bar of a high mineral content buffing compound which is made for harder metals... Such as steel and just spend alot of time sitting there and buffing going through alot of beer! LOL I will probably end up posting a thread on the subject here soon enough with pictures.

Hope that helps you man.

Peace Nic

hey man thanks, i'm going to have to try that. I'm thinking for tight spots a dremel??? I have a dremel kit with little buffing wheels, grinders, sanders that will get in tight spots. Other than that use a grinder with a buffing pad. I'm not afraid to spend a lot of time on something. I tried a port and polish with the extra head I have for a 400ex. That took so long but it worked.

[coryatver]

nice quad I like the black on black

[Quicklsvtec]

Originally posted by FoxHondaRider
hey man thanks, i'm going to have to try that. I'm thinking for tight spots a dremel??? I have a dremel kit with little buffing wheels, grinders, sanders that will get in tight spots. Other than that use a grinder with a buffing pad. I'm not afraid to spend a lot of time on something. I tried a port and polish with the extra head I have for a 400ex. That took so long but it worked.

Sweet I hope it works for you man. I pulled the dremel out for the tight spots. I think the felt tips just suck on those dremels... Or I just suck at using them cause I went through alot of them.

[Quicklsvtec]

Well alright I have been trying to get my new maier fenders put on for awhile now. Its not cause I am dumb its because I have now been sent two defective front fenders! Both I have got have been paper thin and buckling in the same place on the left fender at the bottom. Has anyone got this before from them. The company I ordered it from says they have never heard of it before but looks like it happen's.

The worst part about it is that we have a trip to the dunes next weekend and I might have to use my stock yellow plastics if they do not get me a good set by then! DAMN!

Here are a couple pics, I am really up in arms about this whole deal I am getting!

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000718.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000713.jpg

Peace

[Quicklsvtec]

Well I finally got something new done been working like crazzy and have not been able to even touch the quad. Still waiting for my front fenders.... Oh well check out the 450R shocks instead!

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000741.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000740.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000738.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000736.jpg

Peace Out

[DementeD]

Beautiful...
i love lookin at this but hate it..my quad definitely could get a makeover..but i dont wanna go through the down time :D
i think imma just beat on mine til something bad happens then rip it all apart and build the motor and make it look all nice n perty..


+1 on a quick lsvtec too..i just sold mine and got away from that scene to move over to this scene :)

[Quicklsvtec]

Nice Nice Good to know someone knew what my name means... I still have it just has to be rebuilt, it sat in the driveway for four years while I was in Germany and Japan. So now I am in this so it still just sits. Here is a pic of it, back in the day it ran a 14 sec flat.

MY OTHER TOY...
http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/carpichoodopen.jpg

[DementeD]

damn that is perty too

i had an 88 crx hf fully gutted..first had an oem lsvtec
81.25mm p30 pistons on ls rods arp rod bolts and head studs vtec water/oil pump with jdm b16 tranny act street/strip with a lightend flywheel..never got it tuned but it rode out nasty
was sittin on vx wheels
then i rebuilt it with forged pistons/rods to be boosted but ended up selling it

i miss it but i dont...id rather have the atv as my toy

however im pissed the truck i just bought last week broke down tonight..it kept stallin for some odd reason...cant beat honda reliability and gas mileage ...

[DementeD]

damn that is perty too

i had an 88 crx hf fully gutted..first had an oem lsvtec
81.25mm p30 pistons on ls rods arp rod bolts and head studs vtec water/oil pump with jdm b16 tranny act street/strip with a lightend flywheel..never got it tuned but it rode out nasty
was sittin on vx wheels
then i rebuilt it with forged pistons/rods to be boosted but ended up selling it

i miss it but i dont...id rather have the atv as my toy

however im pissed the truck i just bought last week broke down tonight..it kept stallin for some odd reason...cant beat honda reliability and gas mileage ...

[Quicklsvtec]

I know what you mean. My truck's tire blew out on me last friday on my way to work. Sitting on the highway going 50mph felt my truck doing somethin wierd. I pulled over to the right lane and as soon as I got there my right front blew out. The tire ripped all the way around where the side wall meets the tread. It really sucked.

Anyway yeah man I want to drive the honda again soon eough.

[Quicklsvtec]

Well the plastics are almost done just need to add a couple bolts here is an update.

Check out the new head light mounting area... lol okay not really.

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000744-1.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000743-1.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000742.jpg

[DementeD]

looks beautiful

i was going to do the very same scheme however i think i may go with a dark silver powder coat and a grey/blk plastic scheme..

anyway looks very good all the way around.

[BigBore24]

looks awesome. good to see you finally got some useful fenders. id love to go all black with my ex. i got the frame just not enough $ for the fenders. i bet your ready to get it out

[Quicklsvtec]

Well guess what I got all the plastics buttoned up! I will get some pics up later today once I get those cool warning stickers ripped off. Thanks for the comments guys.

Peace Nic

[Quicklsvtec]

Well I have not posted on this for awhile but here it is. We all went riding last weekend at Sand Lake in Oregon and here are the pics... Only lost a couple bolts...


http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000749.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000753.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000754.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000755.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000756.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000760.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000761.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000763.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000766.jpg

http://i8.photobucket.com/albums/a8/QuIcKlSvTeC/P1000771.jpg

[400exrapes]

looks really good, where is that place you went riding at? and get some action pics too!

[Quicklsvtec]

That was at sand lake in Oregon. Not the best place for riding but good enough for a day trip, only 1.5 hours away from where I live. Sorry no action pics, but working on putting the video we took to get put up. Been working too much to work on that. Thanks though.

Peace Nic

[Gibson]

You should take all of the disks out of your muffler and just put the endcap back on it. thats what i did, it gave me more bottom end power. it saves u from having to polish and polish your exhaust because of soot. but it is really loud tho