Lets seem some XC Z400's

[miles Machine]

Post em up.

[kawi_rider_97]

I was lookin for an xc kfx or ltz too and i found this one.

[johnsoninc86]

not very close up ones, but still cool.

Pulling third place holeshot at LTM, the white one in the middle front row
http://photos-b.ak.facebook.com/photos-ak-sf2p/v75/130/88/504126406/n504126406_36793_7023.jpg
early in the season, easter weekend
http://photos-b.ak.facebook.com/photos-ak-sf2p/v72/223/55/70804851/n70804851_30411105_4278.jpg
I'll get some more up when my poor mans rebuild gets done, it will then have some new graphics, suspension, tires, grab bar, and all cleaned up.

[Dr89]

this was mine, poor things been parted out now :(

[Dr89]

another

[sales8807]

:)

[my88r]

edit

[my88r]

edit

[johnsoninc86]

heres one of my buddies, its probably the best lookin Z i've seen in some time.
http://photos-a.ak.facebook.com/photos-ak-sf2p/v75/87/9/13733844/n13733844_35678488_8163.jpg

[sales8807]

I beg to differ on that being the best looking :p

[Flynbryan19]

I don't race, but it is setup for xc.

[Dr89]

I beg to differ on that being the best looking

haha 2nd!

[johnsoninc86]

Originally posted by sales8807
I beg to differ on that being the best looking :p
ya ya, to each their own... i dunno, something about the grey and red turns me on...:eek2:

[lawdog800]

What mods are you guys doing to prep for XC??????

[Flynbryan19]

Suspension is the single most important thing you can do to your quad for any form of riding/racing. It is the first thing I would do to any quad.

Protection is also very high on the list. A quality swingarm skid is a must. A frame skid is also very good to have.

After these two items I would go for tires. A good quality 6py tire is great for resisting punctures and flats.

Motor mods is the last thing on my list. Almost everyone(with the exception of maybe an A rider or a pro) can not use all the power a stock motor offers in the first place.

[lawdog800]

Thanks. New bumper and Nerfs are definantly on the list as is a belly skid. I bought a swing arm skid that was suppossed to be in great shape and it is pretty bent up, so I have to TRY and straighten it, otherwise it goes to scrap recycle dump. Just making sure A-arms and wider axles were not needed. I guessed that stock narrow is better, but didnt know for sure.
Are the stock shocks rebuildable/ re-valveable????