IOWAracer
01-13-2008, 10:18 AM
Well after riding my 04 Honda for about 8 months I cracked the case so I decided I would get rid of it and I traded for a 04 YFZ450 raced it all last year and it was ok but I decided I wanted anoter quad to build.. I am starting with a 07 Honda 450ER I picked it up as a Left over for 5700 OTD so I was decently happy with that
I already have my shocks which are 18.5 Elka Quad rate piggy back fronts which have been gone through by Colby.
I will be sending the rear shock to him as well.
Will be running BOPP Race Components.
K&K Graphics.
IMS Tanks, Brake, and Shifter.
Going to be going Cheap route on exhaust and trying out the new LEXX which is in Rockymountainatv.com
Tag bars inless Fasst Co. arnt back ordered when I try to order Monday and protecting my hands will be Power Madd with wrap arounds.
I will stick with a stock stem untill its bent!
I will be using Kenda XCF 22/7/10 with my own version of tire ball called POOL NOODLES:devil: They dont even go flat like a TireBall would and in the rear I will be using Knarly XC 21/10/9.
I will be Running PRM skid plates and Rath XC Bumper with his Grab bar...
I pick up the bike mid this week didnt have my truck with me Yesturday when I bought it So if I can get a day off work I will be picking it up!
Stay tuned to the Build and I hope this makes a good PRO AM/ College A GNCC build.
If there is anything you guys think Im missing or have found to work better let me know also I will have some stock suspensionfor sale!
BB
I already have my shocks which are 18.5 Elka Quad rate piggy back fronts which have been gone through by Colby.
I will be sending the rear shock to him as well.
Will be running BOPP Race Components.
K&K Graphics.
IMS Tanks, Brake, and Shifter.
Going to be going Cheap route on exhaust and trying out the new LEXX which is in Rockymountainatv.com
Tag bars inless Fasst Co. arnt back ordered when I try to order Monday and protecting my hands will be Power Madd with wrap arounds.
I will stick with a stock stem untill its bent!
I will be using Kenda XCF 22/7/10 with my own version of tire ball called POOL NOODLES:devil: They dont even go flat like a TireBall would and in the rear I will be using Knarly XC 21/10/9.
I will be Running PRM skid plates and Rath XC Bumper with his Grab bar...
I pick up the bike mid this week didnt have my truck with me Yesturday when I bought it So if I can get a day off work I will be picking it up!
Stay tuned to the Build and I hope this makes a good PRO AM/ College A GNCC build.
If there is anything you guys think Im missing or have found to work better let me know also I will have some stock suspensionfor sale!
BB