View Full Version : Caster camber
riding4fun
01-10-2008, 05:21 PM
OK, I have the caster and camber just about where it needs to be. My problem is the toe in is way off. I have the tie rods turned all the way in and it is still too much toe in. Do I need shorter tie rods or do I re adjust the heim joints until desired measurement.
This is such a PITA.
wvspeedfreak
01-10-2008, 06:06 PM
I sent you a pm that may be of some help to you.
riding4fun
01-10-2008, 08:22 PM
Jason,
Thanks, let me know what the measurements are at your convenience.
raidernut
01-10-2008, 10:21 PM
You may need to take some material off of the tie rods, a little from both ends and try it that way. I know i ended up shortening ours to get it set up properly
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.