1987 TRX250R Kansas City, MO (Axis/Walsh/ESR/LSR)

[danhung11]

************$5800 FIRM "AS IS" in the picture***********

If anyone is interested, I will prepare a parts list for you. Prefer pickup.... If this doesn't sell in a week or so, I will part it on eBay.

Everything is pretty much mint. All new bearings, seals, platics, powdercoating on everything except frame.

OEM Frame with Candy Red Powder Coat
Walsh Fully Adjustable Long Body Plus 3 A-arms Std Travel
Walsh Custom Foot Pegs (1st set made, now Mike sells them on his website, these are the stainless steel mounts, and are now chromed)
ESR TRX5 Center Mount Pipe
ESR Air Box Eliminator
Hiper Rear Wheels - BRAND NEW w/ Kenda Klaws MX 6 laps!
ITP Pro T-9 Rolled Lip 4:1 Front Rims with matching Klaws
Duncan Cool Head
Stock Cylinder 265cc (unsure what bore size)
Barnett Dirt Digger Clutch
Custom Axis Fully Adjustable Dual Rates
Brand New Maier Plastics/Maier Vented Hoods w/ Custom Graphics
LSR Stem
Tag 2 Fat Bars
Polished OEM Calipers
Pyramid Reed Valve
Chrome motor mounts
LSR Blockoff Plate
Brand New OEM 400EX Front Master Cylinder
RTC Adjustable Clutch
IMS Rear Brake Lever
IMS Short Shifter
IMS Intimidator Bumper
ProDesign Reed Spacer
Brand New Stainless Steel Lines - Front and Rear
New Bearings EVERYWHERE! Swingarm, Linkage, Front Wheel, Stem, etc.
All ball joints in Walsh Arms have been replaced.
Brand New Clear Clarke Tank
BRAND New LSR Twin Row Billet Carrier
RPM Dominator II Axle - Like New
LSR Billet Stem Clamp

All parts have fresh powdercoat.

Last time I checked, it had 215lbs of compression running on 110 octane with Klotz Benol 32:1.

Lot's of polish work as well....

If this price is too high for you, we can work out a deal and I can strip some parts and sell at a reduced price.

Thanks for looking! I will post more pics if needed.

http://i223.photobucket.com/albums/dd228/danhung11/000_0143.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_0142.jpg

[danhung11]

Links do not work...

[ml450r]

That is a good looking 250r.

Merrill

[ml450r]

Can I ride it?

[danhung11]

Originally posted by ml450r
That is a good looking 250r.

Merrill

Merrill,

I will let you test ride it before you buy it. It is valved for your weight....:devil:

[danhung11]

Originally posted by ml450r
Can I ride it?

Yes, you may ride it.

Maybe it will be nice here before too long and we can either take it to your track or bring it out to Travis's.

Have you ridden on their track?

If it's not enough, I have a CT310 motor we could put in it.

[ml450r]

I haven't been to Travis's track. I have been wanting to ride some. I don't know how to get a hold of him though. My track is all grown over...lol.

[danhung11]

Originally posted by ml450r
I haven't been to Travis's track. I have been wanting to ride some. I don't know how to get a hold of him though. My track is all grown over...lol.

Maybe once I build my XC-R, I can bring it out and get some trails cut through that track.... lol

His track is in Oak Grove, not a bad little track. Not really little, it's like 1.1 miles and has some pretty good rhythm sections and is pretty friendly. Nothing bigger than GV. I may have their email address...

I will get back to you.

[Chino886]

Bump for a nice quad

[danhung11]

For an even $6k CASH...

I will throw in a Walsh -1 MX Style Swingarm. If you pay costs, I will have the swingarm and lower arms coated candy white - I just thought that would be badazzz. :D

For another $2500 (I think - last I spoke to Nate), Mike will make you the matching Frame and Stem to go with this bike. I have already looked into it.... lol

So for like close to $9k - you will have a FULL WALSH RACECRAFT TRX250R with CUSTOM AXIS FULLY ADJUSTABLE SHOCKS - I would think that this would be fully race ready. :devil:

Not bad in my honest opinion.

[waddle]

sweet bike dan hung!,

[danhung11]

Originally posted by waddle
sweet bike dan hung!,

Thanks bud!

[havinnoj]

dan is a good guy to deal with. why are you selling??? did I miss something? If you do part it out, I'd likely pick up the rear carrier from you depending on price.

[danhung11]

Originally posted by havinnoj
dan is a good guy to deal with. why are you selling??? did I miss something? If you do part it out, I'd likely pick up the rear carrier from you depending on price.

Funding a wedding, so instead of going into debt up to my eyeballs, I am liquifying some toys. I am the kind of person where I would rather just pay for stuff up front then to pay for it 5 years down the road.

At the same time, I have a complete aftermarket XC-R waiting for coating and few other items before assembly, I have always wanted to get back into the woods again. I am waiting to see if this sells whole or part it and I can use a lot of the parts to get my other one going since most of these parts are brand new or like new. I would probably keep the arms and axle too just to widen it out for the dunes.

BTW how nice of a carrier do you need? I know you are pretty picky just like me but this one is good with tight bearings. If you want me to hit it with the wheel and clean it up, I will.

http://i223.photobucket.com/albums/dd228/danhung11/000_0568.jpg

If you need more pics, email me.

[havinnoj]

I'd definately get it polished up - I have an open carrier swingarm and my current carrier is a regular LSR carrier...I'd like something that could be polished up real well. But you'd probably have to pop all the internals out and reassemble them...shoot me a PM and we can talk some more.

[danhung11]

:eek2:

[brandonpeake]

free bump
if u part dibbs on motor

[danhung11]

Originally posted by brandonpeake
free bump
if u part dibbs on motor

Your pm's are full.

[danhung11]

Motor is sold.

TTT!

[ridered92]

how much for the front shocks will they fit a 300ex let me know

[danhung11]

Originally posted by ridered92
how much for the front shocks will they fit a 300ex let me know

Don't think they will fit. Do research first.

[ridered92]

ok thanks any ways

[foxracer5464]

HOW MUCH FOR THE HIPERS ARE THEY 8X8S

[danhung11]

Originally posted by foxracer5464
HOW MUCH FOR THE HIPERS ARE THEY 8X8S

SOLD!

Check out this thread...

http://www.exriders.com/vbb/showthread.php?s=&postid=3118843#post3118843