BRAND NEW 400ex +2+1 a-arms

[bens250ex]

ok so here is the deal i had a set of a-arms by fullflight i rode them for a year and bent them a couple weeks ago. i had a race coming up and had to send them off to be replaced. i sent them back to fullflight and was suppose to recieve a new set by christmas. ups messed the shipping up and i didn't get them. well i had a race comin up on jan 5 and needed some a-arms i found some pretty close went and picked them up. i now recieved the brand new a-arms from fullflight and i need them gone so i can pay back what i paid for these new a-arms i got. so i have a brand new set of blue +2+1 flullflight a-arms. they have lifetime warranty. i have never mounted these a-arms they just came in the mail today. i will include tie rods and ends and ball joints but you will need to order some of the heims that go in the ball joints, i am not lookin to make money just what i paid for the other a-arms for first one who says they want them for 250 shipped gets them pics will come tonight if anyone wants them

[hondarider101]

fit the 04 450r ? do they?

[IMSROLL450R]

What exactly is needed for the arms to be complete? I am interested in the arms and do you take paypal?

You can email me pics at jerid.sutton@kiewit.com if you want so we can discuss.

[whc]

I am not too famiar with changing front arms but would my stock arms heim joints work or is this a different part, any ideal what cost would be involve. am real interested, I assume they will fit am 2007 400ex thanks Mild Bill

[bens250ex]

here is what you need to have them ready to rock . you can buy them by the two like this bid or you can get them in single. you will need 3 or you can get all 4. i have one that is still in good shape. the others were messed up when i had to pry them out of the spindals.

http://cgi.ebay.com/ebaymotors/2-HEIM-SPINDLE-INSERTS-HONDA-SUZUKI-LG-3-4-16THREAD_W0QQcmdZViewItemQQcategoryZ43974QQihZ012Q QitemZ220144987093

[toddreaves04]

I am interested in the 400ex arms you have for sale. I have a 87 250x I am looking at putting them on along with 450r shocks. Are you able to adjust the camber, caster, and toe on the arms? If you know anything about this conversion any info would be very helpful. My email is offroad4x4yota@hotmail.com Thanks

[bens250ex]

http://s238.photobucket.com/albums/ff1/bens250ex/th_DSCF0436.jpg

http://s238.photobucket.com/albums/ff1/bens250ex/th_DSCF0438.jpg

http://s238.photobucket.com/albums/ff1/bens250ex/th_DSCF0431.jpg

you will need 3 of these

http://s238.photobucket.com/albums/ff1/bens250ex/th_DSCF0434.jpg

[bens250ex]

yes these a-arms are fully adjustably in all ways.

[bens250ex]

bump

[bens250ex]

about to hit ebay

[imc188222]

Tried to pm you but your box is full. I am interested in the arms. Want to make sure that I can get the parts though. The ebay link isn't working. To me, the picture of the part needed doesn't look like a heim joint, it looks like the guts of the ball joint, the tapered part that goes into the spindle. Do you have a link where you can buy the parts? pm me
thanks

[bens250ex]

pm sent. ya'll can also email me at hondamanben@hotmail.com thanks

[bens250ex]

anybody ? any offers ? my pm's may not work so email me at hondamanben@hotmail.com