Exhaust Leak

[Nystie]

I have a HMF Sport Pipe on a 200 Outlaw 525. There is a leak where the slip on pipe meet up to the stock head pipe. Any ideas how to seal it up?

[eerhard09]

Is the slip on butting up against the lip on the header? I know mine went on tight and had to really encourage the two pipes to fit all the way together!!!! Maybe try getting it together a little better and then crank the clamp a little tighter. I have the same setup as you and am having no trouble with it. If you absolutely can't get it, call them and tell them the issue.

[Evasiveone]

Is it possible that you ended up with an HMF for the 500 Outlaw and not the 525 Outlaw? The 500 head pipe is a little larger diameter, so even though you can get the HMF for the 500 to work it will be loose without a gasket or something.

[Nystie]

Thanks for the information on the 500 vs. the 525. I will call hmf and check.

[Nystie]

Evasiveone, Turns out you where right about the 500 pipe vs. 525 pie they are different sizes. I took my system to a local muffler shop to have it fixed. Thanks for the help