PDA

View Full Version : lt80 crankcase oil?



cmskms
01-07-2008, 10:43 AM
Hey, i've got an Lt80 that i'm completely rebuilding. I don't see where you can put oil in the crankcase or drain out. Also when doing the oil block off, theres a couple other tubes that go to a couple spots on the transmission etc. i was told those can be removed as well...is that correct. Any help would be appreciated Thanks

LT80
01-09-2008, 02:35 PM
Welcome to the forums.:)
There is no oil in a 2 stroke crankcase. There is oil in the gearbox. It's inside where the front sprocket is. The fill is on top (remove bolt), drain in bottom. There will be one of those brass tubes in the top. Those (gearbox and rear end) are vents and should have hoses tied up on the frame.

cmskms
01-09-2008, 02:49 PM
Thanks for the reply. I don't know wat i was thinkin with the crankcase oil thing, musta had a brain fart. I'm just knew to these little cvt's and the tranny bein off the backend. So i need to leave the vent tubes then i'll assume? Thanks again, I'm sure i'll have clutch questions soon.:D