beobe99
01-06-2008, 04:50 PM
99.9% positive the wiring is correct now thanks to aceman.
But its still not firing.
I have a test light (thought I got ripped off untill i realized it takes a battery hehe!! :blah:
I would of thought I would need to press it to a wire then kick the bike over but the light lite right away on the black/red wire from stator, after the CDI, and at the wires plugging into my coil..
Now after the coil.. (putting the needle into the sparkplug cap) it DID NOT light.
Do I need a new coil?
Did what i check with this cheapo thing prove nothing?
any help would be highly appreciated..
Thanks,
Bob
But its still not firing.
I have a test light (thought I got ripped off untill i realized it takes a battery hehe!! :blah:
I would of thought I would need to press it to a wire then kick the bike over but the light lite right away on the black/red wire from stator, after the CDI, and at the wires plugging into my coil..
Now after the coil.. (putting the needle into the sparkplug cap) it DID NOT light.
Do I need a new coil?
Did what i check with this cheapo thing prove nothing?
any help would be highly appreciated..
Thanks,
Bob