YFZ front end on Banshee

[New450r]

Ive herd that a YFZ front end will work on a Banshee and Ive looked at both and they look like it would work. The question is will it and what is needed to be done.

[Hondamaster5505]

It can be done, but doesnt just bolt up, you have to cut the frame up.

RajunnCajunn has this setup and set it flat out sucks. It lowers the front too much, and according to him it flatout sucks and he doesnt recomend doing it. Hes planning on taking that setup off.

Also, what does help handling a bit is bolting up yfz shocks to the stock a-arms. My cousin has this setup and it works pretty good.

[bloodmoney23]

it works, but throws the ratios off too much hence what Honda said, it will drop the front end about 2 inches and give you a horrible ride. You also have to cut and modify the YFZ arms to fit. Your best bet is finding a decent set of aftermarket a-arms on ebay and running the YFZ shocks. Best bet if you ask me.

[Toadz400]

Search this over at BansheeHQ. I remember reading about a few people doing it with good results. I believe there might have been a How-To that showed how to do it the correct way.