PDA

View Full Version : Starting gate bog?



EJ Racing 07
01-05-2008, 08:00 PM
Hey I've tried different drive springs, weights, running a Kevlar belt and now back to stock on everything. I can't get rid of this gate bog, Rpms jump for a second and then it bogs out for 3 feet! Really kills our hole shots! Any suggestions? :grr:

markvette
01-05-2008, 08:46 PM
4.5 rollers

EJ Racing 07
01-05-2008, 09:05 PM
I'll have to check my notes but I think I tried that

wrhracing
01-06-2008, 08:01 AM
If it is in new condition... Check out your stator plate and see if the timing can be advanced. If the screws are all the way to the left of the slot in the plate you'll need to loosen the 2 screws and turn the plate counter clockwise. About 4 to 6 mm. Be careful, check your plug for sign's of leanness or to much advance.

EJ Racing 07
01-06-2008, 08:40 AM
Thanks I'll check into that.

dodgepower
01-07-2008, 09:37 AM
Check compression.........If its dropped enough it wont pull enough...........had it happen to us

thumper492
01-14-2008, 01:47 PM
MINE DONE THAT IT WAS THE REAR TORQUE SPRING ONLY USE KOSO IVE TRIED ALL THE OTHERS AND THE ONLY ONE THAT WORKS IS THE KOSO 2000 MABEY THAT WILL HELP

marsrace2
06-10-2008, 04:40 PM
I have had this issue also and have been able to fix it by changing the pilot jet. went form the stock 40 to a 48 when it was a little cooler and that really made a big difference, now that it is a little warmer in MN I dropped it back down to a 45.

jetmedic
06-11-2008, 08:43 AM
BOG, That word needs to be removed from the english language!