PDA

View Full Version : Just ran the 610 on the dyno



Sparky YFZ
01-03-2008, 01:09 AM
I just ran my pump gas 610 on the dyno. The build used a stock 39 fcr, stock pipe, stock filter, stock valve size, 10.9 compression, and stock air filter, my porting. And it made 58 hp at 7600 and 48 ftlbs at 5200. It also made over 50 hp from 5400-9400 rpm. I ran this on a dynojet dyno on pump gas. I will have my other 610 on the dyno in about 2 weeks with a pipe, 43 fcr, bigger valves, bigger cam, and higher compression, my porting, and a few other goodies. I think I can reach high 60's hp with my race gas 610. I will keep you guys posted.

GE4x4
01-03-2008, 04:53 AM
Sounds awesome and powerful. Did you happen to dyno it stock to see the increase?

Sparky YFZ
01-03-2008, 09:16 AM
Yes it made 36 hp bone stock just off the showroom floor.

Quadevil
01-03-2008, 09:49 AM
Do you have some pics with the graphs please? I would love to check them ;)

TYLER329
01-04-2008, 08:52 AM
Who makes the 610 kit and where would you go to get what you need?

Sparky YFZ
01-04-2008, 09:43 AM
I sell the 610 kits

MOTO HEADZ RACING 1 530 927 9827

Jmack
01-04-2008, 04:59 PM
how much for the 610 kit? And where are you located? I'm in the bay area, very intersted in your set up.

Sparky YFZ
01-04-2008, 09:54 PM
Im about 4 hrs away from you. I live in portola Ca. Give me a call and i can give you some prices and options.

MOTO HEADZ RACING 1 530 927 9827

Quadevil
01-21-2008, 09:29 AM
Originally posted by Sparky YFZ
I will have my other 610 on the dyno in about 2 weeks with a pipe, 43 fcr, bigger valves, bigger cam, and higher compression, my porting, and a few other goodies. I think I can reach high 60's hp with my race gas 610. I will keep you guys posted.

Any news Sparky? :)

Sparky YFZ
01-21-2008, 05:33 PM
I have not had the time to do it yet. I will post as soon as I get it done.

MOTO HEADZ RACING

Quadevil
01-21-2008, 07:27 PM
Originally posted by Sparky YFZ
I have not had the time to do it yet. I will post as soon as I get it done.

MOTO HEADZ RACING

Ok , thanks! :)

Just anxious to see the results, to decide what mods i'll be doing to mine :D

Tastykake Kid
02-02-2008, 07:38 PM
Originally posted by Sparky YFZ
Yes it made 36 hp bone stock just off the showroom floor.

Is that HP or TQ? Racers Edge, a shop in Tucson AZ just dyno'd a totally stock 450 and they show'd 45HP & 33TQ. I'm well aware of dyno differences and how a dyno is only a tool to show differences between modifications done on the same day with the same temperature and barometric pressure and yada yada yada. . . . . Just curious if you got 22 additional HP just by putting in the stroker & bigger cylinder?
Either way, thanks for posting the info. It's nice to see more and more builders taking these quads to the next level. I love mine and will be doing some engine mods once my pipe is completed and all dyno runs are done.
And please, let us know how that 610 did with your additional mods (pipe, porting, valves, etc. etc.???)

Sparky YFZ
02-03-2008, 12:40 AM
36hp and 30.5 ftlbs on a dyno jet dyno at 4500 ft and 55 deg.

I have made MUCH higher #s in my other 610 with pipe, carb, + valves, and a little more porting. Im still testing this build to see how well it will hold up. Before I will sell this combo. Big #'s dont matter if they wont make it to the top of the dune.


All the mods are stroker crank, big bore 11.1 comp, my grind cam, and my porting.

Does John own Racers edge? If so he has seen some of my stuff run at Sand Mt Nev.

44oEX
02-20-2008, 08:58 AM
the 36hp is the 450 right? or the 525 :confused: