..........Post Your Custom Work!..........

[Brauap]

This thread is for anyone to share their custom work, items they made or remade, just anything that is.. CUSTOM!

You can post the anything you want that is custom.. the smallest little detail that you love, or the hugest thing that anyone has ever seen! So are you ready to start posting? Good! GOOO!

[Ruby Soho]

heres my airbox modified, wasn't hard looks decent..

[AtvMxRider]

You have got to be the biggest post whore I have ever seen

[F-16Guy]

Originally posted by AtvMxRider
You have got to be the biggest post whore I have ever seen
...says the guy with 12,000+ posts.:rolleyes:

Originally posted by F-16Guy
...says the guy with 12,000+ posts.:rolleyes:

lol I was thinking the same thing. Hey I rather see more post that actually have the forums moving instead of nothing

[REPOMAN]

Originally posted by F-16Guy
...says the guy with 12,000+ posts.:rolleyes:
OWNED :D

actually come to think of it 12,000 isnt really a huge number for how long he has been a member. Look how many I have and I've only been a member since July 2007. I like to reply or help in almost every forum.

[hornetgod13]

Originally posted by AtvMxRider
You have got to be the biggest post whore I have ever seen

Let's see here..........

ATvMxRider-6.04 posts per day
Brauap-3.29 posts per day
FoxHondaRider-9.64 posts per day

Who's the real post whore? :rolleyes:

yeah i was gonna say i have a crap load of post every day because I go in half the sport quads on here and reply to stuff or help people out then theres open forums and all the body, suspension and handling. So the story ends with me having a lot of post

[Hondamaster5505]

adapted an entire banshee rear end to my old blassie.

ALOT of fab. work and time.

All parts are- banshee swinger/axle/hydralic brake system

worked out nice. +4W with stock rims and like +8W with aftermarket. +1 longer

pretty sweet cheap way if you know how to fabricate, had all the banshee parts sittin around! :)

[400exBRAAP]

there aint much fabricating to put the banshee axle in a blaster, or the rear brake, just gotta make a mount for the master cylinder and that other part that goes to the brake pedal. and for swapping the front brakes i just think you have to drill something out if i recall correctly. i aint got no pictures, but i cut out the airbox on my blaster and rigged the fenders up so they were attached to the seat and came off when you pull the seat off, just like a 400ex.

[Hondamaster5505]

Originally posted by 400exBRAAP
there aint much fabricating to put the banshee axle in a blaster, or the rear brake, just gotta make a mount for the master cylinder and that other part that goes to the brake pedal. and for swapping the front brakes i just think you have to drill something out if i recall correctly. i aint got no pictures, but i cut out the airbox on my blaster and rigged the fenders up so they were attached to the seat and came off when you pull the seat off, just like a 400ex.

no, the banshee SWINGER took alot of fab.

We had to cut it so it can bolt onto the engine part, where as the banshee normally goes straight across..

We made it exactly precise so no dirt gets in there and eats away the bearings

[400exBRAAP]

oh, i see what your saying. sorry about that. i knew people put banshee axles in there, cuz they are wider, but puttin the banshee swinger in there was new to me. once again, sorry about that

[Hondamaster5505]

Originally posted by 400exBRAAP
oh, i see what your saying. sorry about that. i knew people put banshee axles in there, cuz they are wider, but puttin the banshee swinger in there was new to me. once again, sorry about that

no prob, lol:p

it was a fun project.

My blassie handled so much better after that and it climbed a lil better from the swinger being +1

[One_Bad_400]

Originally posted by FoxHondaRider
actually come to think of it 12,000 isnt really a huge number for how long he has been a member. Look how many I have and I've only been a member since July 2007. I like to reply or help in almost every forum.

i've been here just as long as mister 12,000 but i only have 2400

[gcart2]

this is the broken swinger mod. for instructions contact me at (555)-ima-idiot
http://i88.photobucket.com/albums/k181/gcart2/DCAM0059.jpg

http://i88.photobucket.com/albums/k181/gcart2/DCAM0060.jpg

http://i88.photobucket.com/albums/k181/gcart2/DCAM0054.jpg

http://i88.photobucket.com/albums/k181/gcart2/DCAM0053.jpg

yea..:p

[j450rking]

here is all my ex mods that i have pics of b/c i know brauap is lookin for and i know he loves seein the post numbers go up but i use to be like that once

and then i left myspace and never went back!!!!!!!!! lmao!

here is the swing arm bolt greas fitting mod

[j450rking]

heres one of the 250r hood i had for a bit

[j450rking]

here is my oil filter cover i did with my dremel

[j450rking]

here is the air box lid i did

[j450rking]

here is one of my cbr 1100 oil cooler

[j450rking]

heres my trail tech endurance speedo in my bar pad

[j450rking]

and here is one of my led light kits

Originally posted by j450rking
heres one of the 250r hood i had for a bit

thats crazy because look at these designs I made quite some time ago. I never showed them to anybody and I thought i was inventing something.

[j450rking]

lol that looks pretty close

Originally posted by j450rking
lol that looks pretty close

your the 1st i have seen to use a hood with your lights and thats what my idea was.

[j450rking]

it didn't really look clean enough for me to want to keep it and i didn't want to drill holes in my plastic or a big hole for the scoop to be funktional so i took it off

[zrpilot]

Custom stuff:

Key Re-locator

http://i94.photobucket.com/albums/l97/zrpilot/IMG_0473.jpg


450R carb adapter

Carb adapter (http://www.exriders.com/vbb/showthread.php?s=&threadid=314423)

[XXXRACER165]

Here is my airbox lid

[hornetgod13]

Originally posted by XXXRACER165
Here is my airbox lid

That's the nicest custom airbox lid I've ever seen. You could make some money making those and selling them.

[Brauap]

These are awsome guys!!!! Keep them comming!!!!!

[project400ex19]

I Will have to get a camera from my g/f to show a couple mods I did,

1.Made the key fit into the reverse hole on the 05 plastics.
2.re-wired with a GN-4 connector to use a raptor tail light and installed a brake light switch on front brake lever (before the 450 came out) able to take it off for track riding and put it back on for trail riding.

I know there is a few more I just cant think of them at the moment...

[maxfior]

Here is my custom airbox lid (cost was $17.00) just needed the filter from EHS Racing. :)
---
http://www.maxfior.com/atv/400EX/MODS/AIRBOX/DSC05266.JPG
---
Max

[triple b]

Here the stock exhaust I modified…….It is now a better flowing 1 ½” tip I also modified internal baffles

http://i185.photobucket.com/albums/x181/Triple_B_21/400ex/ThanksDesert044.jpg

I also added 2 3/8” to the stock stem (Sorry I do not have a better pic)

http://i185.photobucket.com/albums/x181/Triple_B_21/400ex/ThanksDesert042.jpg

Next project some custom made +2 or +3 chromoly a-arms with uniballs

[AnDy7]

triple b how do you keep your plastics so nice looking?

[86 Quad R]

sorry about the not so good pics

custom OEM a-arms with replaceable ball joints

boxed swinger gusset and hand made case saver

hand made head light bracket


the 250REX with a stroker 265 engine

and the YZ250R that was built using a 89 banshee front, a 85 atc R frame and a 96 yz250 engine

<a href="http://img215.imagevenue.com/img.php?image=17551_09-19-07_0607_122_157lo.jpg" target=_blank><img src="http://img215.imagevenue.com/loc157/th_17551_09-19-07_0607_122_157lo.jpg" border="0"></a><a href="http://img155.imagevenue.com/img.php?image=17551_IM000585_122_669lo.jpg" target=_blank><img src="http://img155.imagevenue.com/loc669/th_17551_IM000585_122_669lo.jpg" border="0"></a><a href="http://img101.imagevenue.com/img.php?image=17557_IM000533_122_892lo.jpg" target=_blank><img src="http://img101.imagevenue.com/loc892/th_17557_IM000533_122_892lo.jpg" border="0"></a><a href="http://img214.imagevenue.com/img.php?image=17559_R_frame_00004_122_46lo.jpg" target=_blank><img src="http://img214.imagevenue.com/loc46/th_17559_R_frame_00004_122_46lo.jpg" border="0"></a><BR><a href="http://img175.imagevenue.com/img.php?image=17559_yz250r_143_122_741lo.JPG" target=_blank><img src="http://img175.imagevenue.com/loc741/th_17559_yz250r_143_122_741lo.JPG" border="0"></a>

i have custom air scoops i'm currently working on. Its something nobody has ever done or seen before. When i'm all done i'll post some pictures

[250x_kyle]

i made a mud screen that is attached to the front frame rails by the bumper so the oil coller didnt get cloged on muddy days. soon i will be making a thick chassis skid moddifying the subframe to accept a grab bar and a flip top subframe. Will also be fabing up a custom air box and oil tank.

[416exfreak]

All my custom work is internal...(portwork).

I dont have anything on the outside:(

This thread is giving me some good ideas though.:D

[triple b]

Originally posted by AnDy7
triple b how do you keep your plastics so nice looking?

This is what we use.... http://powersports.honda.com/the_goods/parts_and_service/detail.asp?ProductGroup=Cleaners+%26+Polishes&PartId=08732-GLR-001&PartValue=Honda+Glare+Professional+Polish&TheGoodsDir=3

[monte433]

VW steering stabilizer cost about 20$ http://img.photobucket.com/albums/v44/monte433/sterringstabilizer002.jpg

[F-16Guy]

LMAO!!! That steering stabilizer is awesome! You could put that in some fancy packaging and sell it for three times what it costs. How does it work? Can you compare it to any aftermarket stabilizers?

[monte433]

Originally posted by F-16Guy
LMAO!!! That steering stabilizer is awesome! You could put that in some fancy packaging and sell it for three times what it costs. How does it work? Can you compare it to any aftermarket stabilizers?

At first it was a little stiff compared to any of the aftermarket ones we have used but break in and playing with the length of the steering shaft connecting rod have made it work very well.

[Pipeless416]

Originally posted by FoxHondaRider
i have custom air scoops i'm currently working on. Its something nobody has ever done or seen before. When i'm all done i'll post some pictures

heres mine that i made a few years back. im thinking about redoing them so they can be perfectly symmetrical.

[j450rking]

that vw stablizer looks just like a one of the older pep ones. nice bracket btw

Originally posted by Pipeless416
heres mine that i made a few years back. im thinking about redoing them so they can be perfectly symmetrical.

I am actually going to try for making small business with custom things for a 400ex and later move on to other quads. I have some great ideas that once perfected will be a huge hit.

[One_Bad_400]

Originally posted by FoxHondaRider
I am actually going to try for making small business with custom things for a 400ex and later move on to other quads. I have some great ideas that once perfected will be a huge hit.

and they would be?

i'll let ya know when i'm done lol I'm keeping everything a secret until I am 100% done with the product.

[monte433]

Originally posted by j450rking
that vw stablizer looks just like a one of the older pep ones. nice bracket btw

It could be what PEP used I don't know.
I can't take credit for the fabrication I have a buddy that is just anal when it comes to fabricating things like this usually when he builds something it looks better than something you can buy.