wiring question

[dirtdigger71]

I tore down my 400ex about 3 months ago for a freshen up makeover. now I am putting it back together & I am wiring it back up. there is a green w/white stripe & a green w/ silver spots connected together with an eyelet fastener at the coil area. does it attach to the coil on the left fastener(looking at it from shifter side of quad)I cant find it in my manual to be sure,but that is how the wire sits with the harness mounted.thanks for any help.

[SAR Tracker]

the green/white stripe and green/silver dot are ground wires, according to my manual....

[dirtdigger71]

good info. thanks. does it show where they are attached?

[SAR Tracker]

with the ring connector, you could put it under any mounting bolt to the frame.

I'll check this afternoon when I get home from work exactly where.....

[dirtdigger71]

sweet!! that would be great. I'm just afraid to smoke some parts over somthing so simple. thanks alot!!

[dirtdigger71]

anybody wanna take a peek at theirs and let me know? I would really appreciate the help. Thanks.

[BigBore24]

I checked on mine and those 2 wires should go into the same eyelit connector and they are grounds that can be mounted on either of your ignition coil mounting bolts.

[dirtdigger71]

THANK YOU! I really appreciate your help.