jetting help

[JJs450r]

well ive come to find out jetting this thing is no where near easy as my honda was its currently jetted with a 182 main 50 pilot and i think the need is 2nd maybe 3rd from the bottom, running the rossi exhaust open lid pro design adapter and foam filter running 110 cammed and 13:1 piston getting alot of popping when i let out of gas at high rpm, any help would be greatly appreciated

[Ride1Rob]

Since your fuel airscrew is the easiest thing to get to (provided you have the ziptie) see where it is. Should be 2-3 turns out from closed. I would think she's running alil rich on decel. Also, you may want to go down on your pilot. Do you have any portwork done? I'm only running a 45 pilot and look at the bottom of my motorwork. Hope this helps ;)

[low10s]

i had mine at 48 pilot, fuel screw i think it was 2 turns out, and the stockmain i think it was a 158. when i put my esr pipe on there, i had to go all the way down to the stock 42, fuel screw 1 turn out, needle in the 4th clip and a 172 main, and it is rich still. so gonna drop the needle another clip and try a 170-168 and see how it does. a rule of thumb is if you are more than 3 turns out on the pilot the jet is too small, and if you are no more than 1/2 out it is too big.

[yfzrider45]

I get ALOT of popping too, its mainly becasue my air filter is dirty! when i put a clean k&n in, the popping/backfireing goes away completely.....

[JJs450r]

thanks it should help out i was gonna mess with it today but turns out the jet kit i just got didnt have piliots in it :-/