Lonestar Racing a-arms

[eddie pettengil]

can someone post a pic of Lonestar Racing a-arms around the spindal- ball joint area. not sure if the lock nut for the ball joint goes inside or outside the arm. Mine are +3 arms, standard travel.

[pimpt250r]

upper or lower arm

[eddie pettengil]

not sure on both, i would think they would be the same.

my ball joints screw into the arms, I thought they would not screw in but have a lock nut on both sides so you can adjust camber without having to remove the ball joint from the spindal to screw in or out. I bought them brand new and they came with ball joints and tie rods so i'm guessing its the right set.

[Rich250RRacer]

Lock nut goes on the outside of the arm. The only way to adjust them is to separate the ball joint from the spindle.

[eddie pettengil]

thanks for the reply

[havinnoj]

here's a pic. they are not the same on my +2/+1's

nuts on uppers are on the outside.

nuts on lowers are on inside.

http://img338.imageshack.us/img338/661/ssale003fo3.th.jpg (http://img338.imageshack.us/my.php?image=ssale003fo3.jpg)