Parting out 2002 Laeger's Protrax 250R

[protrax]

Parting out 2002 Laeger's Protrax 250R
This was Johnny Hales 2002 Season Pro Mx bike
It is a 2002 Laegers narrow front Cr500 link pro peg frame
frame is red subframe is nickel plated
Has a ported 265 1989 engine in it now
Has White fullbore race cut on it now
couple 89 seats etc
lots of parts
I will be getting pics and taking it apart asap
Let me know what you need

[stever250r]

I need the brackets grommets and hardware needed to mount the rear plastic to the seat. I am using an aftermarket latch so I need everything but the latch mechanism.

My Pm box is not working, so if you have them let me know how much.

[dirtdog400ex]

I need some aftermarket front shocks. PM me if you have a set for sale.

[250Renvy]

Dibs on rear break system till I see pics and price?

Grommets?

[protrax]

Originally posted by stever250r
I need the brackets grommets and hardware needed to mount the rear plastic to the seat. I am using an aftermarket latch so I need everything but the latch mechanism.

My Pm box is not working, so if you have them let me know how much.
you must have an 86-87 all I have is 88-89 parts , the plastics just bolt to the seat and the front catch is built in to the seat base

[protrax]

Originally posted by 250Renvy
Dibs on rear break system till I see pics and price?

Grommets?
What do you need for brakes? front, rear , what?

[protrax]

sorry i didn't get a chance to pull it out clean it up etc , so i just snapped them in the garage


EDIT my pics are too big I will post later with photobucket or just PM me your email
Thanks

[protrax]

Its a bit dirty but I will clean everything before its shipped
http://i127.photobucket.com/albums/p125/protrax/XL016.jpg
http://i127.photobucket.com/albums/p125/protrax/XL009.jpg
http://i127.photobucket.com/albums/p125/protrax/XL013.jpg

[800screws]

how much for the rims?

[312R1]

How much for the swingarm?

[pdxbigfoot]

If you can better pics and pricing requirments to reverendseven@hotmail.com Thank you and i look forward to hearing from you.....Jason

[step869]

id like to buy the quad tech hood

how much shiped to 14513??????


thanks,
john

[stever250r]

Originally posted by protrax
you must have an 86-87 all I have is 88-89 parts , the plastics just bolt to the seat and the front catch is built in to the seat base

I have the 88-89 style seat. I didnt realize the plastic just bolted to the seat.

I will still need the rear fender support bracket and the small clips that hold or bolt it on. The one that is shaped somewhat like a....... large U............. for lack of a better description.

I think by looking at the fiche that there is also some small rubber grommets that may go over the ends of the support bracket but It has been so long since I have actually seen all this bolted on that I really have no idea of how or where it is actually attached to the rear plastic.

Do you know that bracket and clips that I am talking about? Do I still need this part if I am using a aftermarket seat latch?

[protrax]

Originally posted by stever250r
I have the 88-89 style seat. I didnt realize the plastic just bolted to the seat.

I will still need the rear fender support bracket and the small clips that hold or bolt it on. The one that is shaped somewhat like a....... large U............. for lack of a better description.

I think by looking at the fiche that there is also some small rubber grommets that may go over the ends of the support bracket but It has been so long since I have actually seen all this bolted on that I really have no idea of how or where it is actually attached to the rear plastic.

Do you know that bracket and clips that I am talking about? Do I still need this part if I am using a aftermarket seat latch?
No I don't have the u brace or mts for it I have only used that on stocl leanth plastic , If it is trimmed up at all you really don't need it IMO

[protrax]

Originally posted by 800screws
how much for the rims?
I am keeping the rear beadlocks
but $200 shipped on the fronts there in great shape

[250Renvy]

Let me know your price on the rear brake setup. Open to offers?

[protrax]

Originally posted by 312R1
How much for the swingarm?
I am not going to split the swingarm until the frame sells


And Yes I am open to offers

[step869]

is the hood 4 sale????????????

havent gotten an answer yet

[protrax]

Originally posted by step869
is the hood 4 sale????????????

havent gotten an answer yet
Sorry My buddy is taking all the quad tech stuff

[250x_kyle]

whats on it for a grab bar?

[step869]

ok well tanks anyhow

if he backs out let me know


thanks,
john

[protrax]

Originally posted by 250x_kyle
whats on it for a grab bar?
Aluminum MX bar 88-89 style $20 shipped

[250x_kyle]

do you take paypal? do you have feed back?

[ZSNOW]

how bout frame? its a laegers frame right? how much?

[protrax]

Originally posted by ZSNOW
how bout frame? its a laegers frame right? how much?
Sure is its a 2002 Laeger's Narrow front Cr 500 link rear Pro peg frame
I am asking $1600 shipped for the frame, subframe, Cr 500 linkage and swingarm for it :)

[ZSNOW]

well your 4 hours at the most away from me. so how much with out shipping?

[protrax]

Originally posted by ZSNOW
well your 4 hours at the most away from me. so how much with out shipping?
$100 less without shipping

[ZSNOW]

does it come with a arms? cuz didn't the narrow frames take +5 a arms?

would you trade for anything?

[protrax]

Originally posted by ZSNOW
does it come with a arms? cuz didn't the narrow frames take +5 a arms?


would you trade for anything?


Not for $1500 The T pin is gone but I have a +3 standard travel for sale separetally
On narrow frames you can run up to a +4 max
Only things I need would be factory red 88 250R fenders or a nice set of red fullbore 250R plastic
What do you have?

[ZSNOW]

i got black full bore plastic. but its not enough to trade for a frame..

[couchhater]

what about the front brake lines if there +2,s shoot me a price with shipping to 30518.

[protrax]

last bump before Ebay

[dirtdog400ex]

You should have a pm from me about the shocks. How much you want for them.

[protrax]

guys check my ebay feedback
alang47

[ZSNOW]

whats the ebay part #?

[protrax]

Originally posted by ZSNOW
whats the ebay part #?

parts are not on the bay yet but I need to make some room so thats where there heading later this week

Does anybody want the Laegers frame, swingarm, cr 500 linkage , PEP ZPS rear shock +3 laegers A arms with TCS ZPS front shocks for $2000 hit me up quick

[ZSNOW]

if i had the 2k id buy it right now

so free bump

[mc_racer]

What do you have as far as brake lines?

[gregw338]

Is the radiator aftermarket or stock? If aftermarket, what kind & how much? What about hubs?

[omararacing26]

do you have any rear hubs and how much shipped to 55304?

[speedy119]

how much for the 265 cylinder ?
send pics to g_rider85@hotmail.com
thanks