Lower A-arm balljoint removal

[Honda#4]

Anybody know a fast way to get the stock A-arm balljoint off the spindle, I keep beating it but just doesnt work. My pickel fork is to big. I have the top arm off so i been using a punch and sticking it through the top hole and hitting it that way but the damn thing dont budge. HELP!!!

[Ruby Soho]

when i removed mine i left the bottom arm on the frame and had my friend hold the spindle/hub while i hit the arm with a rubber mallet.. after a few hard hits it popped out

[Honda#4]

Hmmm I guess i'll have to put it back on and see.Hope it works cuz thats the perfect job to release anger.

[TRX450RACER174]

I have a bolt with a nut and collar that fits inbetween the ball joints i loosen the top ball joint nut shove the bolt inbetween the two and crank on the nut until it pops then i repeat on the bottom no chance of screwing anything up that way.

[jherbie28]

give the inside of the spindle a good hit and use a block of wood so you dont put dents in the aluminum(sp) :devil: should pop right out.

[Honda#4]

I got'em all out thanks for your help guys.