PDA

View Full Version : Want Your motor/ aluminum parts clean?



440challenger
12-24-2007, 07:38 AM
Its been brought up before, but i know a lot of people are doing winter rebuild/ cleanups lately. I've been using the product quite a bit lately.

Its Eagle One ETCHING Mag Cleaner.
It used to come in a black spray bottle but now it comes in a silver bottle with blue sticker. Make sure its the ETCHING.
Its under $3.00

I cleaned a bunch of dirtbikes up, with aluminum frames and hubs,motors. These bikes were ridden in red clay and left dirty. I spray it on and let sit for about 30 seconds and do a quick scrub with a red scotch brite pad and it melts away the dirt/grime.

I also just did my 450r motor which was stained, grease stained and from using hard chemicals on it. Motor came out like new.

Make sure you dont get the stuff on painted surfaces such as the gold color honda uses .


Try it out, you will be happy!!

Pappy
12-24-2007, 07:45 AM
be very carefull with any product that etches...it will do a number on electrical parts as it will eat copper.

440challenger
12-24-2007, 07:49 AM
Yea it will eat anything you leave it on long enough.
You want to work quick as it works fast, keep the hose handy.