450r fan problem

[travis283]

recently got a 05 450r, When I got it it caught my eye that the key switch was missing due to the oversized bars, I assumed it was moved under the nose piece as that is where I relocated my others, To my surprise there is no trace of it anywhere witch means I cannot get my fan to run I know the fan works, If I put juice to it directly it spins fine.. I guess my question is where to I go from here to make it work properly?? I looked for a empty plug of some sort the only thing not hooked up is the headlight, Does anyone know what wires I need to find and hook together and what color they are anyhelp would be greatly appreciated!!..

Thanks A Million,
Travis

[wayfastwhitey69]

hot wire it so it runs 24 and more

[TRX450RACER174]

Take off the hood and you should have a group of plugs on the left of the frame, the ignition switch plug is a Blk 4pin plug with wires colored BLK/WHT , GREEN , RED , and all BLACK.

[travis283]

Dont want to have it run all the time,, okay there is 3 sperate wire plugs on the frame I know the blue and green run the fan.. What wires would I need to hook together to make the fan work properly??..

[TRX450RACER174]

Red and Black wires will make the fan run the other two wires ground when the switch is turned to the off position.

[travis283]

so I assume that if I hook the red and black wire together this should take care of my problem that I am having??

[BSTURDIVANT]

Yep!!

Originally posted by travis283
so I assume that if I hook the red and black wire together this should take care of my problem that I am having??

yes

[travis283]

Thanks guys, I will give it a shot today your help is greatly appreciated..


Travis