beobe99
12-20-2007, 06:04 PM
I know wiring Qs. have been beatin to death (cause ive searched) but none have clearly helped with what I have here.
I'm finished with my complete R build and the wiring is the ony thing holding me back from starting it and riding away. I had everything hooked up to where i THOUGHT it was solid. Kicked it over many times with no reponce. I bought a tester but havnt figured it out yet. after reading the posts I have found and triple checked the manual Im pretty sure I had the wiring wrong the first time around.
What I have
-A used harness from ebay (w/ everything cdi, coil, etc) this harness was a mess.. straightened it up a bit. I think dude had aftermarket lights hooked up.
-Tether kill switch
Im running NO lights.. I just want this to start and go! I took off all the black wire cover to track the wires best I can.
My Qs.
1. how many wires should be coming from the stator?
(I have one blk/red and I forget the other two (grn/yellow yellw/wht maybe) these other two are connected to a plug) to me it looks like these other two may of been added.
2. Is the blk/red my main power?
3. Do I hook the tether to the blk/red? Like just tape it in?
4. Can I cut and forget all wires heading to the rear tail light?
If someone could post and explain best they can the basic way to hook this up to get it running Id HIGHLY appreciate it!!!
If you could just explain one way (if theres other routes) I also appreciate it cause Im confused enough here hehe!
THANKS guys.
I'm finished with my complete R build and the wiring is the ony thing holding me back from starting it and riding away. I had everything hooked up to where i THOUGHT it was solid. Kicked it over many times with no reponce. I bought a tester but havnt figured it out yet. after reading the posts I have found and triple checked the manual Im pretty sure I had the wiring wrong the first time around.
What I have
-A used harness from ebay (w/ everything cdi, coil, etc) this harness was a mess.. straightened it up a bit. I think dude had aftermarket lights hooked up.
-Tether kill switch
Im running NO lights.. I just want this to start and go! I took off all the black wire cover to track the wires best I can.
My Qs.
1. how many wires should be coming from the stator?
(I have one blk/red and I forget the other two (grn/yellow yellw/wht maybe) these other two are connected to a plug) to me it looks like these other two may of been added.
2. Is the blk/red my main power?
3. Do I hook the tether to the blk/red? Like just tape it in?
4. Can I cut and forget all wires heading to the rear tail light?
If someone could post and explain best they can the basic way to hook this up to get it running Id HIGHLY appreciate it!!!
If you could just explain one way (if theres other routes) I also appreciate it cause Im confused enough here hehe!
THANKS guys.