junk motors

[jim_beam_racer]

im looking for a motor preferably blew up so if u have a junk motor that is just takin space gimmie a price

[brandon34r]

i have an 05 yfz motor.bottom end only.Rod snapped and scarred the crank and cases a little.Tranny should be good as well as whole clutch assembly.Clutch side case is missing.Comes with starter gear also.I have pics if your interested.$175 plus shipping

[f4istunna]

I might be interested in that for the cases.. Are they in good shape no case damage from chain or anything? Oil mod?

[jim_beam_racer]

so is the case all good it just needs a new rod and cylinder head and ****

[brandon34r]

the cases are good everywhere except where the cylinder bolts up to it.the rod must have nicked some pieces out of it.Like I said before the clutch side case cover was taken off to get to a kicker that had been taken off and then I sold the case cover.I am in the process of getting some pics posted up

[A A R O N]

I've got an 05 yfz450 motor that dropped a valve and all hell broke loose in the top. The head is VERY scarred and pitted and all of the valves are junk. The cylinder may be fine, it's kind of a toss up. The piston is junk and the cams were robbed for another bike. Everything else if there and in good shape. The bottom end is fine and is complete. Basically the piston and cams are missing and the head is probably not useable. $700

[jim_beam_racer]

thanks but no thanks aaron thats to much money but ill think about yours brandon34r

[250x_kyle]

i have an 02 400ex motor that is runinning . it may need a valve adjustment but that takes 30 mins. let me know how much your willing to spend.

[jim_beam_racer]

100 or 200 at the most
im lookin for a good project motor