what jet sizes in Missouri

[New450r]

What jet sizes in Missouri running power reeds Pro Circuit pipes I have a jet kit from Dyno jet kitted it acording to directions with no lid but ran a outerwhare. Wouldnt start pull started finaly ran good but still wouldnt start. Put stock parts back in and have to blow air in the tube in bottom of carb to start. If you need more info just ask.

[New450r]

sorry my Pc is messing up

[RagunCajun]

280 mains, middle needle clip and stock polit should be a decent start.

Maybe go a little bigger than 280 mains im not sure.

blowing in the vent tube, there i heard it all...:rolleyes:

[machwon]

Originally posted by RagunCajun
280 mains, middle needle clip and stock polit should be a decent start.

Maybe go a little bigger than 280 mains im not sure.




That jetting should be right on for the summer, yes maybe upto a 300 for the winter riding.

If it doesn't start though, you likely have another problem as well. Your pilot jets should have a tiny hole through the middle lengthwise on them. My guess is that might be plugged as well.

[New450r]

I am just going to get new carbs or run a single set up. TORS system is messed up.

[machwon]

Just unplug the black box under the gas tank to disable the TORS. It does make it nicer if you have the TORS eliminator kit though. 2 into 1 carb set up, I would spend your $$$ elsewhere. Hope this helps.