PDA

View Full Version : It won't start!!



Jaybird
12-14-2007, 07:44 AM
After the starter sprocket exploded and got jammed in between the stator and flywheel I can't get the bike to start. I have fuel but no spark. I didn't see any damage or broken wires while I had the side cover apart. How do I check the stator and see if the coil is getting a signal without pulling the cover again?
Brian

gmen
12-14-2007, 01:22 PM
Now you dun it .:D
Let me think about this one.:confused:

Jaybird
12-14-2007, 03:17 PM
I'm getting a "pulse" from the wire that goes to the trigger and about 1.6 volts on the two yellow wires that come from the stator while turning the motor over. I dont get anything at the coil.

Brian