parts off of a 250r?

[chiefbong360]

do any parts off of a 250r fit on the 400ex?
mainly the tierods, rear break assem. and the clutch

[Dave_989]

the completly rear suspension system will work meaning the swing arm from a 1986 or 87, bearing carrier, axle, brake assembly and hubs will work but u have to use the 400ex rear linkage and shock.

also 250r a arms will work, and i the spindle hub assemblis will work, but i think that will require slight modification.

also 250r front shocks will work but they will lower the front a little.

450r pegs will also work, they are a little wider than 400ex pegs

about the clutch that i have no idea, maybe someone else would know.

[chiefbong360]

hey thanks alot man, your gonna save me a bunch of money on a rear break if it fits, any idea about the tierods?

[CSR400EX]

the whole tie rod assembly is about an inch longer but it will fit.

[j450rking]

the rear caliper will fit without any modding. i should be getting one tomorrow. they have 2 pistons so it should be better

[chiefbong360]

just put the rear breaks on yesterday, as long as you us the mounting plates for the 250r everything fits great!!! also the tie-rods fit exactly. maby we could get a sticky up of everything that carries over... i know it saved me a ton of money

[Dave_989]

a sticky would be a good idea, but if u are going to do it, do it for all the quad parts that will work not just the 250r parts.

[chiefbong360]

like what? i wasn't aware of other quads with parts that fit? i guess im a noob here haha

[j450rking]

i put on the 250r caliper and bracket last night and rode around in my driveway and it works great.