Parting out MX 250R!!!

[redrider03]

I'm finally doing it. Tearing down the 250R. It's an '89motor and frame. Things I have off already are:
Front and rear Fullbore plastics cut race style. One Industries seat cover and extra foam.
And the graphics on the plastics$400

Oversized gas tank. little over 3 gallons I believe. with cap
and breather hose. $115

AC nerf bars, bars are scratched and dented in some spots$100

FMF Gold Series SST Full system exhaust, needs a good
polishing, a few small dents and a hole punched in
the header so it would fit $175

AC Stadium Style front bumper, screen cracked in one spot and
by mounting area in back $40

AC rear grab bar. scrapped a little from doin wheelies $45

The whole electrical system. CDI box/wires/everything... $175

Airbox w/K&N filter/rubber air intake $150

Brand new UM Racing airbox w/K&N filter still in package
Never used $200

Chrome steering stem w/bar clamp(7/8)
A little rusty at the bottom $125

case saver $15

stock radiator $50

Fuel petcock $25

Metal radiator shroud $30

All 4 hubs PC'd slivervein $200


This is just the stuff I have taken off so far. Just trying to give ya an idea. I'll get pics up later tonight, with some prices too. With a better list also lol..

[pdxbigfoot]

A decent rear brake caliper....if so im interested. Pics and pricing to reverendseven@hotmail.com thank you in advance....Jason

[redrider03]

http://www.trx450r.org/forum/index.php?showtopic=50990&st=0&gopid=429191&#entry429191

This site has some pics posted. If there's something that you need, let me know and I'll tell ya what i got. Some things I might keep and switch over to the 450R. Thanks for looking!!

[redrider03]

How bout $40 for the bumper and $125 for the tank sound. Let me know, thanks.

[redrider03]

I'll send ya pics if give me your email address. It says the files to big to load on here. Thanks

[250Renvy]

how much for the Ohlins? Rear Brake setup? Grommets and bolts?

[Gregjy]

gregjy29@yahoo.com fullbore pics??? How much shipped to 97062 Tualatin Oregon

[redrider03]

I'm not %100 sure I'm gonna sell the Ohlins. I might send them in and put them on the 450 if I can. As for the rear brake setup, I haven't had the cahnce to get at that yet. Need to check everything out first, ya know. And there's already somebody ahead of you for the rear caliper. First come first serve, but if that falls through I'll let u know right away 250Renvy. Thanks for lookin. I've got more pics of items if anybody wants them, and will be taking more soon.

[redrider03]

I have to help a friend move to a new home in a little bit, so I'll post some prices when i get home later b4 I leave to go snowmobiling. Thanks

[f4istunna]

engine, specs and price.

thanks

[redrider03]

The specs on the engine I'm not sure of, my buddy was the one that built the motor. This is his old quad. I cant just ask him, cause he's outaa state for awhile working. I do remember him saying it was bored 70 over. Wiseco piston, Pro Design Cool Head, thats all i can remember off hand. It still runs strong, so there's nothing wrong with the motor. I'll get some pics of it, but i know that still doesn't help with the specs. Let me know, Thanks

[Cr85rRida]

send pics of the plastics and seat to cr85rrida@yahoo.com

include a price and specific details on conditon. thanks

[BarberB48]

How much for the motor?

[redrider03]

I would like to get around $600-$800 for it. It's an '89 long rod, wiseco piston, pro design cool head, aftermarket clutch. I have an extra dome that can be installed if wanting to run straight race gas. There is also the V Force reeds on it that are being sold with it. Let me know what you think. Lets make a deal lol. Thanks, Paddy

[honda1988]

how much for the frame i live in wisconsin, where do you live?

[redrider03]

I live in St. Cloud, in Fond du Lac County. I was thinking around $400. Where do you live? Let me know what ya think. Thanks, Paddy

[redrider03]

List updated. Have more pics if you would like them. Just send me your email address. Thanks

[honda1988]

i live in manitowoc, could i get your phone number. Also could you send pics to schnell87@hotmail.com. I would probly come and take a look at them sometime this week. I am possibly interested in other items.

[redrider03]

bump

[BarberB48]

Can you email me a picture of the engine.

Britney.Barber@asu.edu

Thanks.

[honda1988]

pm sent

[redrider03]

http://www.trx450r.org/forum/index.php?showtopic=50990&st=15&gopid=431475&#entry431475

Pics of almost everything now uploaded here. Thanks for looking!

[honda1988]

how did you ride that frame after it was welded when the welds are unrusted and unpainted

[redrider03]

I rode it through fields, wooded trails, and small tracks that me and my buddies had built. It rode nice and straight, no wobble or veering off to one side. One of the cracks never cracked all the way, that would be the one higher up in the photos that I had emailed you. It was welded tho as you can see. Thanks, let me know if there is anything else.

[honda1988]

that's not what was getting at. those welds are raw, un painted if it has been sitting for any amount of time those welds would be rusted up. Obviously they were shortly welded before the pictures were taken.

[redrider03]

It was welded back in june or july. It's not a fresh weld, I just take care of my things, as you can see.

[honda1988]

your not getting it, welds rust if they are not painted usually in week if not sooner. there is no way you can take care of a raw weld. that was not welded in july.

[redrider03]

Well, I don't know what to tell you. I watched it get welded in the middle of the summer. I can take new pics again if you want to see how it still hasn't started to rust. You want the # of the person who welded it so that you can verify this? Thats about all I can do for ya. Thanks

[RedRider23]

Hey do you still have the fmf exhaust.... if so. can i get pics and a price to missbek-hallum@hotmail.com thanks alot

[redrider03]

The rear Nissin brake caliper has been sold. Thanks pdxbigfoot!!
;)

[stocktires]

Way old post, sorry, still got the seat cover and plastics?