Parting out 450R XC

[WOOLIN]

04 TRX450R
Motor with carb $1650
New High Compression Piston
New Cylinder
Valve job
Hot Cam
HRC air box
Radiator

PRM Belly skid plate $35
custom steel sprocket guard and swing arm skid $50 Sold!
Laeger's XC a-arms Borich style $700
Fox evols $850
Laegers stem $300
Leagers axel $300
Quad Tech Hood $40
Complete Alba gripper seat $70
anti fade nut $25 Sold!
Rear Fox shock with remote dual comp and rebound adjust $600
Laegers Swingarm with Ars/Fx Linkage and Carrier $950
IMS Drybreak Tank $130
IMS Pro Pegs $140
Custom Cromoly nerfs $75
Pro taper bars $35
PRM baja grab bar $40 Sold
Sparks Exhuast $250
Gusseted Frame $450
Air filters $7.00 each

[Hondaexboy]

can i get a pic of the pegs and the hood?
gaines400ex@yahoo.com

[andy roth]

Pmed you.

[quad313]

Picture of the hump seat and sparks to rickjr@crossleyeconomy.com

what is the rear shock eye to eye? Those only work with those links right, sorta like a CR500 link set up?

[jason_david1]

very interested in the hump seat and anti fade. send some pics to jason_david_5203@hotmail.com

[85and93]

pics of the hood to dblracing@sbcglobal.net

[rap169]

is this one of borich's quads?

[WOOLIN]

Originally posted by rap169
is this one of borich's quads?
no but it has all the same major components

[hondarider101]

pm'ed you about the skid

[the Z Man]

Rear skid with sprocket saver, anti fade and filters. pics with price shipped.. Z.
Iowa 50156

[travis283]

pics of the skid and front bumper, sent to Travis283@Hotmail.com.


Travis

[andy roth]

Sorry I had my old address ,Changed it.
Can you send pics on tank and seat? Thanks Sruth@fuse.net

[WOOLIN]

I will have pics of everything posted by the end of the weekend.

[ridered199]

parts still for sale?

[justinh]

seat still available?

[quad313]

I've been waititng for pictures......!

[redrider03]

pics of the seat to drunkenleprachaun@hotmail.com

[quadgod440ex]

pics of the sparks exhaust and of the Arms please.. Thanks

[drdsraptor]

email pics to drdantonio@comcast.net.

[quadgod440ex]

anyone got anything from this guy or did he decide not to part it out?

[quadgod440ex]

What length are the Arms ? +1 +2???

[rap169]

seem like he doenst spend much time on here to reply. Ive left him a few pms and never heard back.

[quadgod440ex]

guess he doesnt wanna sell these parts that fast.

[WOOLIN]

OK I just moved into my new house so I will need a few days to get pics of everything. Sorry it has been a mess the last couple of weeks. Will try to get pictures up tonight.

[quadgod440ex]

Length on the Arms please man i need to know asap.

[ridered199]

I AM VERY INTERESTED IN THE FRONTEND. PM'D YOU

[motox450r]

i'll take the pegs for 130.00 shipped. shipping can't be more than 9.00.

[rap169]

i still want the seat if you have it

[xrdrsux]

what kind of gains can i expect with the exhaust. Does anyone have a dyno sheet on small mods and what they do. I really dont know alot about the 450r but i am just trying to help out my buddy that has a stock one and wants some aftermarket go fast stuff.

[WOOLIN]

front end already sold

[rap169]

seat availible?

[j_cyrus3]

bottom dollar on sparks exhaust? i got cash.

[xrdrsux]

interested in bumper and exhaust.. let me know if you got them left

[massé87]

You could put a picture of the hood quad tech and seat grip quad tech

thanks

[WOOLIN]

Pics PRM Bumper $35

[WOOLIN]

Pics PRM Bumper $35

[WOOLIN]

IMS front bumper $35

[WOOLIN]

PRM grab bar

[WOOLIN]

Quad tech seat $70

[WOOLIN]

Gripper Ceet $70

[WOOLIN]

Houser swing arm $225.00

[WOOLIN]

Stock swing arm with carrier $80

[WOOLIN]

Hertz carrier $100

[redrider03]

Is there any holes or tears in the quadtech seat. Do you have any more pics of it? Is the actual seat, or just the cover. $70 shipped? I'm very intrested. Let me know. Thanks

[WOOLIN]

Hood $40

[WOOLIN]

Stock axel $50

[WOOLIN]

Pro Taper bars $30
CR HI Bend

[WOOLIN]

No holes or tears in the seats. $70 plus shipping

[redrider03]

How much is shipping

[WOOLIN]

Renthal CR Hi with clamps $30

[WOOLIN]

Front end

[WOOLIN]

I will take $1600 for the front end including spindles

[quadgod440ex]

is the rear shock LT ? if so what size ?

[WOOLIN]

Anti fade nut

[WOOLIN]

Sprocket guard

[WOOLIN]

pegs

[WOOLIN]

nerfs

[WOOLIN]

tank (drybreak receiver not included)

[jason_david1]

is the quad tech seat the whole seat of just the cover

[WOOLIN]

whole seat

[jason_david1]

with new foam, cover, etc? and no holes right?

[quadgod440ex]

is the rear shocks long travel ?? Also what size is the houser swing arm ? And do you have a linkage with it? Give me a price on a package deal if u do.Thanks

[WOOLIN]

frame

[WOOLIN]

Quad tech seat sold!

[WOOLIN]

PRM summit bumper, Sprocket guard, and anti-fade sold!!

[rap169]

ive wanted that seat since day one!!!! man im so depressed.

[WOOLIN]

The other seat is in mint condition. Never riden.

[rap169]

no thanks looking for a quadtech

[WOOLIN]

more pics coming later

[WOOLIN]

I have 12 air filters 7 bucks shipped each.

[WOOLIN]

Laeger swing arm

[WOOLIN]

Laeger axel

[WOOLIN]

IMS pegs

[WOOLIN]

Steel rotor guard

[WOOLIN]

installed pic

[jason_david1]

r u selling the razrs? if so what size and how much

[lotlizzard]

Still got the other seat and renthal bars. What kind of filters are they? let me know about the seat and bars im intrested.

[WOOLIN]

Stock 04-05 honda filters.

[honda4life72]

are the stock filters new? with cage? pm me a price on the axle , the quadtech hood , and the filters

[WOOLIN]

Bump

[WOOLIN]

bump

[woodsracer420]

how much shipped for the rotor guard? has it ever been bent?

thanks

[WOOLIN]

Rotor guard is sold sorry

[the Z Man]

I want the IMS front bumper and 3 filters for 50 bucks shipped? Z

[honda4life72]

i want the hood , pm me where to paypal

thanks. 72

[the Z Man]

$$$ sent wooly, thanks, Z.

[WOOLIN]

bump

[WOOLIN]

Sparks exhaust $250

[WOOLIN]

Rear fox shock set up for xc rider 185 lbs. Length 16 1/4" long
remote dual comp and rebound adjust $600

[the Z Man]

Hey Woolin, the Axis shock I bought off you some time ago,, I was told I can only use it with an ARS FX swingarm and link, how do you use your rear set up?
Can I get apicture of the swingarm and link set up?
Thanks in advance, Z.

[LEOGM5150]

do you still have the complete engine?

[smitty_31]

Hey.. very :confused: on what u have left... could u possible list everything u have... and post the pics... plz.. thanks

[WOOLIN]

Originally posted by the Z Man
Hey Woolin, the Axis shock I bought off you some time ago,, I was told I can only use it with an ARS FX swingarm and link, how do you use your rear set up?
Can I get apicture of the swingarm and link set up?
Thanks in advance, Z.
Because the eye on the shock is different you can't use a gt thunder link. but I supose you could send it off to axis and have that changed. I sold the swing arm and link last sat. Here is a pic from ars/fx. The shock eye goes on the inside of the link not the outside like everyone else.

[WOOLIN]

Originally posted by smitty_31
Hey.. very :confused: on what u have left... could u possible list everything u have... and post the pics... plz.. thanks
04 TRX450R
Motor with carb $1650
New High Compression Piston
New Cylinder
Valve job
Hot Cam
HRC air box
Radiator

Hertz billet carrier $100 shipped
PRM Belly skid plate $45 shipped
Laegers stem $275 shipped
Leagers axel $250 shipped
Quad Tech Hood $40 shipped
Complete Alba gripper seat $65 shipped
Rear Fox shock with remote dual comp and rebound adjust $600
IMS Drybreak Tank $130 shipped
IMS Pro Pegs $130 shipped
Custom Cromoly nerfs $45 shipped
Pro taper bars $35 shipped
Sparks Exhuast $250 shipped
9 Air filters $7.00 each shipped

That is what I have left. Most all of the pics are posted in the thread.

[smitty_31]

i didnt see any pics of the alba seat....Could u post one plz

[WOOLIN]

Originally posted by smitty_31
i didnt see any pics of the alba seat....Could u post one plz
here

[the Z Man]

My question is though, did you use it with a swingarm other than ARS FX?
as I was told you can only use their swinger..

[WOOLIN]

I used it with my Laeger swing arm. The make one that you can use with that link. You have to tell them what link you are using when you place the order.

[smitty_31]

Give me a call about the seat at...6182401302. Thank you

[turbo j]

You have'nt mentioned the PRM grab bar since page 3. I will take it for 35 shipped to Davenport IA 52804. I can paypal.

Will you take $100 for the IMS Pegs?

[WOOLIN]

grab bar sold.

[smitty_31]

Money sent for alba seat.....

[HAKKATTACK]

can you post a list of parts you have left?

[WOOLIN]

04 TRX450R
Motor with carb $1650
New High Compression Piston
New Cylinder
Valve job
Hot Cam
HRC air box
Radiator

Hertz billet carrier $100 shipped
PRM Belly skid plate $45 shipped
Laegers stem $275 shipped
Leagers axel $250 shipped
Quad Tech Hood $40 shipped
Rear Fox shock with remote dual comp and rebound adjust $600
IMS Drybreak Tank $130 shipped
IMS Pro Pegs $130 shipped
Custom Cromoly nerfs $45 shipped
Pro taper bars $35 shipped
9 Air filters $7.00 each shipped

That is what I have left. Most all of the pics are posted in the thread.

[smitty_31]

Hey. the Leagers axel will that go on a stock swing arm? and stock carrier? i dont kno that much about this stuff if soo could u let me kno...

[WOOLIN]

yes it will work with stock carrier and swing arm.

[WOOLIN]

bump

[schaefer]

spindles, hubs, rotors?

[WOOLIN]

bump

[smitty_31]

Hey man... i was just wanting to if u had the tracking number? becuz i havent got the seat yet... and i ordered some bearings after i bought the seat.. and i have the bearings already... didnt kno if there was any problems?

[WOOLIN]

I sent it through the post office not ups. They should have delivered it by now. Can you check with your post office or mail man? Let me know.

[smitty_31]

Hey... ya i thought u went trough ups... but mail man cam into my work and ate... and said i had a package.... so ya its here.... thanks alot man...

[smitty_31]

Hey... i forgot to ask if that Leager axle is stock size or + 2 or 3

[WOOLIN]

It is adjustable from -1 to +3. You just have to move the spacers to get you desired width.

[smitty_31]

K.. well i get my check on the 7th.... so i will be talking to u then... if u want cuz i lost your number give me a call thursday... but ya i will be buying it.. just as long as my check is good...

[WOOLIN]

I have the motor$1000, frame $200, and Drybreak tank $85, and Quadtech hood $30. No shipping on the motor.

[IOWAracer]

what hood? or style can i get pics too Brocbromley@hotmail.com is that price shipped?
BB

[WOOLIN]

hood

[fast1500]

do u still have your frame? if so is it in good condition

[JBhonda204]

i pm.ed you, i want the tank, and some filter's if the lips that hold the hose clamp are still there and not chewed off! interested in axel too.

[honda1971]

Did you still have the frame? Interested in the condition and purchasing. Thx

[shogun_98]

what all do you have left?

[meloyelo400]

ill give you $300 for the frame if it is in decent condition and you still have it. let me know and send me pics if you get the chance. pismoguy04@hotmail.com

[WOOLIN]

frame sold

[06YFZ450SE]

Do you still have the Bully skid plate if so how much shipped and does it come with the bolt and so on to bolt it up. my cousin is looking for one. I didnt see pics eaither. Thanks jimmy

[WOOLIN]

sold

[One_Bad_400]

what length are the evols? are they still available?

[WOOLIN]

They are sold but I still have the rear shock for sale.

[xcracer71]

do you still have the frame?? if so what are you asking for it?

[fastredrider44]

I'll answer that for him. He sold it. However, WOOLIN, would you please update your list? Its kinda confusing.

[600rrpilot]

sent you a pm... Im gonna prob take that tank as long as its in good shape and its not gone. let me know ASAP. sooner the better :D oh and is the actual dry break included?

[4bidden]

Not willing to ship the motor?

[WOOLIN]

This is what I have left.

04 TRX450R
Motor with carb $1650 Sold? Waiting on payment.
New High Compression Piston
New Cylinder
Valve job
Hot Cam
HRC air box
Radiator

Rear Fox shock with remote dual comp and rebound adjust $600

Pro taper bars $35

Stock axel $40

Stock swing arm $50

Tag bars $35

I'll have to check and see what other stuff I have left.

[Pred_003]

are the bars 1 1/8?

[4bidden]

How much for the new cylinder?

[WOOLIN]

Originally posted by Pred_003
are the bars 1 1/8?

Yes they are.

[fastredrider44]

I would like the Tag Bars if they're what I think they are, and the stock axle. I could give you cash at the Morganton race if that'll work.

[procircuit406ex]

Still got the steel rotor guard?


Nevermind just seen the post above...

[the Z Man]

:D

[procircuit406ex]

Originally posted by the Z Man
:D

I'm gonna guess you bought it? lol

[450r603]

I'll take the IMS pegs...do you still have them?

[WOOLIN]

how many times do I have to say it! If it's not on the updated list It is SOLD!!!

[450r603]

Maybe if you would not say something like
"I'll have to check and see what other stuff I have left."
at the end of your post...then people wouldn't have to wonder if you still have it!!!

[WOOLIN]

if you would read the thread five posts before yours is an updated list:rolleyes:

[450r603]

UUMMMM...I DID

...that's what I was talking about.
Go back and read your post! :p

[450R#72]

is the sparks pipe still available? i am very intrested if so

[the Z Man]

What is the eye to eye on the front shocks, you might have it but your post is 12 pages long, weight too.:)

[WOOLIN]

The front shocks are sold. The only thing I have left are pro taper bars, Motor, and a rear axel.

[mudrat454]

Will you take $30 shipped for the pro tapers?

[WOOLIN]

ok pm sent

[laeger~440]

got any hipers

[laeger~440]

got any hipers

[WOOLIN]

all I have left is a motor which might be sold this weekend and a stock axel.

[450Honda23]

any front shocks???