hubs

[natemxz600]

what is the bolt pattern on the 525 irs. would like to get some 10" rears but i cant find any that fit. any help would be great.

[katch26]

4x110 Honda Pattern.....the problem isn't the bolt pattern as much as the offset thats different.

[willb]

The offset isnt the huge issue. I have the same issue with my scrambler and have seen people custon fit old predators hubs onto the scrammy.

Only 10's I have seen are the .160 douglas's and the hipers.

[katch26]

Originally posted by willb
The offset isnt the huge issue. I have the same issue with my scrambler and have seen people custon fit old predators hubs onto the scrammy.

Only 10's I have seen are the .160 douglas's and the hipers.

right, because of the offset:chinese: . The 4x110 rear bolt pattern is the most popular size. Go to rockymountain atv and look up 450r 10" rims and you'll easily find 2 dozen rims, now do the same thing for the outlaw and see what pops up......1. The only difference is the offset. Old scrammy hubs should be the same as old predator rims anyways both are 4x156 bolt pattern

[GE4x4]

Katch is right, the offset is the issue, not the bolt patter. But the Scrambler is the bolt pattern and not the offset. The Scram is a 4/4 bolt pattern, but people put Pred hubs on as the will slip right on. So this gives the Scram the 4/110 and much more choices. With the IRS there are very few choices other then what you allready have seen. OMF can also get you a set.

[willb]

Excuse me. My fault for not proof reading my post.

Offset is an issue, it is not the main problem. The main problem is lack of support by wheel manufactures to produce wheels for all bikes.

I gave the scrambler example as a vehicle from polaris that is very popular and the overall 500 machine has changed only very little for the past 9 model years and still does not have but a couple wheel options.

It seems the same is happening to the outlaw irs lineup by polaris.

[natemxz600]

thanks.that pisses me off that there is barely any aftermarket support. I also think its rediculous why polaris just didnt throw a 10" rim on there in the first place.how much a wheel for the 10" hipers?

[willb]

I have seen as low as 160ish apiece for the hipers. I thibk Douglas makes a low budget 10 in our size. May want to check with them.

Could go with the Douglas .125 and get a set of OMF rings welded in.

Check rockymountain I think they had 10's on back order