valve springs

[jaredbeast]

I'm looking for some new springs and retainers for my 400 but not a whole lot is coming up for aftermarket on the net. I found these ones: http://www.jokersracing.com/content-product_info/product_id-4938/honda_trx_400ex_heavy_duty_valve_springs_trinity_r acing.html
but i'm not sure if there any good or maybe I should just get OEM replacements.

[drew416ex]

If you have a stock piston and cam, or mild piston and cam, oem is fine. If you still want hd springs, those trinity springs should be fine. I personally like kibblewhite.

http://www.denniskirk.com/jsp/tpl/cmn/prodlist.jsp?mmyId=1572&store=Main&catId=1&sort=pricedesc&np=0&brandId=418&av=8659

or

http://cgi.ebay.com/ebaymotors/HONDA-TRX400EX-KIBBLEWHITE-VALVE-SPRING-KIT-TRX-400EX_W0QQcmdZViewItemQQcategoryZ43977QQihZ020QQit emZ300176882674QQrdZ1QQsspagenameZWD1V

They are a little cheaper on ebay.

[Colby@C&DRacing]

we use and sell the kibblewhite ones $90

[jaredbeast]

ok thanks. Its stock right now but over the winter i'm putting a stage 1 hotcam in it and a 11:1 .010 over piston in it. Along with a slew of other parts but thats a whoooooole new thread.

[honda300EXtreme]

if your using a hotcam you would be fine using oem valve springs, hd are not needed in your case,

i just say this cuse 99% of the time you will find stockers alot cheaper than hd springs