stock width

[tman12345]

what is the stock 400ex width, i bought a 400ex with a durablue axle. are they adjustable in width?

[honda8&3]

Well some Durablues are adjustable and some aren't. I'm not sure of the stock width though dude.:)

[tman12345]

do you know how to adjust if they are? thanks for a response

[honda8&3]

Well I am not sure, but you could prolly look it up on Durablues web site. They prolly have some instructions on it. And no problem for the response that's what I'm hear for LOL;) :)

[400exMO]

take the rear rims off, there should be spacers back there.

[08400EX]

You can see the spacers in this pic, look where the shiny part ends on the axle and you can see 2 spacers. This is a -1/+3 Durablue Eliminator.

All you do is pull the axle nut pins, remove the axle nuts, slide the wheel and hubs off, and put the spacers on (or off ) , put the hub/wheel back on and put the spacers you took off on and then reinstall the nut and pin. Takes longer to type this then it takes to do it on mine.

http://i22.ebayimg.com/01/i/000/c4/b6/b587_3.JPG

[klutch]

Stock width of a 400ex is 45.3 inches wide.

[tman12345]

Originally posted by 08400EX
You can see the spacers in this pic, look where the shiny part ends on the axle and you can see 2 spacers. This is a -1/+3 Durablue Eliminator.

All you do is pull the axle nut pins, remove the axle nuts, slide the wheel and hubs off, and put the spacers on (or off ) , put the hub/wheel back on and put the spacers you took off on and then reinstall the nut and pin. Takes longer to type this then it takes to do it on mine.

http://i22.ebayimg.com/01/i/000/c4/b6/b587_3.JPG
alright cool, did you get an 08 yet?

[08400EX]

Originally posted by tman12345
alright cool, did you get an 08 yet?

No, still waiting for them to be released. I bought the 05 in the pic above to tide me over till the 08 gets here.