Tightening The Chain

[lawofthelord]

I SEE THE ALLEN HEAD BOLTS BUT DIDNT SEE SLOTS. aRE THEY AROUND THE ALLEN BOLTS?tAHNKS FOR RESPONDING

[nickm328]

If it is or like a honda the slots are on the left side next to the sprocket put a screwdriver in them and move down to tighten, or up to loosen.

[nickm328]

Oh I see it is a honda, my bad.

[lawofthelord]

Thanks Nick. Ill look at that later today. Im also just figuring out how to use this site. Im new
Lance:huh

[lawofthelord]

:D hey nick. I sure appreciate your help. I found it and successfully tightened my chain. That was easy. I svc it yesterday. Im ready to ride this weekend. How can i look for a side cover for it?
Lance

[nickm328]

If you mean the cover that goes over the front sprocket it's called a case saver and you really need one cause if the chain breaks and it's not there the chain can bust a hole in your engine. You can get them from www.rockymountainatv.com or ebay. Also make sure you have the chain set with about 1.5" - 1.75" of play so it's not too tight cause that will wear your sprockets prematurally, and so it dosen't bind when the suspension goes up and down. Hope that helps.-------O.k. I see what you are talking about with the side cover, I would look on ebay for that.