Log in

View Full Version : Won’t run ????


etondaddy
11-24-2007, 06:03 PM
OK before I start I must say that it’s no big deal the motor’s getting send out to be done for racing. With that said we brought Kyle’s new 90 home today and I removed the throttle screw and told him to have a little fun before we tear it down. The dam thing would not go anywhere and then stall. I took the plug out and it was black cleaned it up and put it back in and it did the same thing. I took the top of the air box off and it runs great (for a stock trx90). I was just wondering what you guys think it might be. If I was buying it as a stock machine I guess I would have to take it back and let them look at it.

Mike Kozura (Etondaddy soon to be Hondadaddy)



http://i58.photobucket.com/albums/g278/etondaddy/100_0074.jpg
wvspeedfreak
11-24-2007, 06:31 PM
Is the choke working right??Congrats on the Honda Mike and Kyle.Keep us posted with the build pictures!
FASTDAD-77
11-24-2007, 07:09 PM
Did you check to see if the restrictor is still in the intake of the air box lid? It looks like a rubber plug with about a half inch hole in the center right where the air enters the airbox lid.
etondaddy
11-24-2007, 07:14 PM
Originally posted by wvspeedfreak
Is the choke working right??Congrats on the Honda Mike and Kyle.Keep us posted with the build pictures!
When you put the chock on it’s worse I smelled gas as I was taking off the trailer something’s making it load up I’m going to play with it tomorrow and see what I can come up with. If I don’t get it right before I tare it down I’ll always wonder about it. We got a new camera on black Friday so I should have lots of pics and video.

Mike
etondaddy
11-24-2007, 07:19 PM
Originally posted by FASTDAD-77
Did you check to see if the restrictor is still in the intake of the air box lid? It looks like a rubber plug with about a half inch hole in the center right where the air enters the airbox lid.
I saw that............ thanks that’s the first thing I'll try tomorrow , makes sense when I leave the whole top off it seams to run great.

Mike
etondaddy
11-26-2007, 10:14 AM
Thats what is was the restrictor on the air box. The motors on the bench ready to go to McVay racing.
Nichols Atvs
11-26-2007, 11:04 AM
Congrats on the new Quad. Post pics of the whole build so we can see start to finish. we may have to enter you in the Quad of the month club.
etondaddy
11-26-2007, 12:13 PM
I've been a jog motor guy for five years I'm going to need some help with this Honda stuff. I may start the new build thread tonight

Mike