removable lowerking kits

[f150mann]

im looking for a lowering kit, that can lower the front of my quad down. i would just ratchet strap it but im looking for something i can build in my machine shop, can anyone give me some pics of theirs or sizes? it would greatly help my design process.

and i know.. they arent for jumping, this is for ice drags, so dont bother telling me that.

[slow96hater]

theres a bunch of pictures of them on ebay. they look almost too easy to make.

[f150mann]

yeah i looked at those, but if someone gave me a few pictures installed would help, maybe even some dimensions! that would be sweet

[86 Quad R]

its been my experience that with the geometry of the 400ex spindles and the angles that they are designed with, that lowering the front will premote a tremendous amount of bump steer and cause the steering sensativity to increase. juss my .02 worth.

[440challenger]

I made my own on my g/f's 400 because i know she wont buy a arms and i had a spare set to experiment on anyway. Kicked the shock mounts on to the side a bit. Much lower,stable and helped her out a bunch. i dont know if this pic will help you or not. i can try to take a new one if need be.

[440challenger]

Heres a front shot, Still have the 22" balloon tires on the front.
Lowered it substantially

[f150mann]

thanks a lot!!!! how far did you kick the shocks out???? do you know how much it lowered it?

[440challenger]

a good few inches... kicked them out almost as far as they could go without hititng the a arms. I was using 450 shocks with it when i made them for my 400, works even better with the stock 400 shocks. All you need is some 1/4 flat stock, grade 8 bolts and a welder