Another what jets do i need for my 450r carb thread

[metalmind342]

ive been searching for a couple weeks tryna gather all the jetting info i can but i just cant seem to get the jist of it. Any way i have an 01 416ex with 11:1 piston, stage 2 hot cam, fmf power bomb header, fmf slip on, and k&n filter. Please lead me in the right direction.

Thanks for all the help

[dariusld]

This will probably be no help. I had 48 pilot, 3.5 turns on fuel screw, needle in the middle and 175 main. Ran it that way and everything was fine. It just seemed to not like to be lugged as much as my stock carb. Now I rejetted and have 50 pilot, 2 turns on fuel screw and 188 main. I haven't ridden it yet, but it idles much better. I wanted it a little rich but I problably went to high on the main. I'll ride it this weekend, and check back.

[zrpilot]

50 pilot, 4th notch on the needle and a 175 main for me. Runs Great!

[metalmind342]

50 pilot, 4th notch on the needle and a 175 main for me. Runs Great!

what are your mods?

and thanks for the responses

[zrpilot]

416 11:1 Wiseco
HRC cam
XC Port and Polish
Sparks exhaust
450R carb, no lid