DanW
11-20-2007, 12:08 PM
This is a cylinder that GT Thunder started to port, but they stopped. They didn't do much to it, and it should run fine the way that it is. Or, send it somewhere to have the porting finished. It is on the stock bore and the bore is in good shape.
The crank is ok. I replaced it because I was going to a 330cc cylinder, and I wanted to start with a brand new crank. The gears show some wear, but they are useable. I replaced them for the same reason that I replaced the crank.
$100 shipped or best offer.
The gears, crank, and cylinder are all from an '87 motor. There may be some other misc. '85-'86 parts mixed in there somewhere - I lost track.
The crank is ok. I replaced it because I was going to a 330cc cylinder, and I wanted to start with a brand new crank. The gears show some wear, but they are useable. I replaced them for the same reason that I replaced the crank.
$100 shipped or best offer.
The gears, crank, and cylinder are all from an '87 motor. There may be some other misc. '85-'86 parts mixed in there somewhere - I lost track.