handle bar clean up

[82racin]

What is the wire plugged into the throttle? It came unplugged when i was riding and it still ran fine. Can it take it off? I already took off the clutch sensor so i dont have to pull in the clutch to start it and i relocated my dash lights to the gas tank cover. I want to get rid of all those wires!!! And I was wondering which parking brake block off should i get?

[450Rchaser]

idk what the wire is but fuelatv makes a nice block off.

[Drewltr450]

on my ltr theres no cable going to the cable but there is one going to front break it looks like its going to the throttle but i ha to take mine off when i got pro tpaer bars it wasnt long enough but its just for the break light so when you pull the brake it i makes the back light turn on mines an 06 so idk it might be differnt for other years? and idk about the parking break i got mine off of ebay for like 10$ it says xcr or something like that on it and it works fine

[82racin]

yea ur right it is plugged in to the brake...my bad. thanks

[DVXracer]

I took ever wire off i could, as for parking break i think mine is CDB or something like that, $10 from ebay.

[450Rchaser]

Originally posted by DVXracer
I took ever wire off i could, as for parking break i think mine is CDB or something like that, $10 from ebay.

Hey what size drill bit did you use to relocate your lights

[DVXracer]

Originally posted by 450Rchaser
Hey what size drill bit did you use to relocate your lights

Damn, i cant recall, i think it may of been 3/8 or 5/16? Im not sure, next time im out in the garage ill check for you.

[82racin]

the holes are egg shaped....i used a dremel tool to make the holes