PDA

View Full Version : Fasst Bars-What is everyone running?


baker400ex
11-14-2007, 07:07 PM
I ordered a set of fasst bars w/a 14 degree bend....I have a 07 Honda 450.with a stock steering stem...will the bars be too low...and wil lthe clamps raise it up any?? Plz n thanks for any responce!
mx1791
11-14-2007, 07:27 PM
i have 12 degree ATV bend on a stock stem and tag clamps and its higher then my old cr-hi tag bars.
DEVINF450R
11-15-2007, 02:18 PM
I agree...they are higher than regular barsBTW 14DEGREE ATV BEND
TRX450RACER174
11-15-2007, 05:07 PM
I am running the CREECH bend with a +2 stem and love them.
national425ex
11-15-2007, 05:35 PM
Originally posted by TRX450RACER174
I am running the CREECH bend with a +2 stem and love them.

i agree, thats what I am running and I couldnt be happier.
05Z400rdr
11-16-2007, 01:50 PM
I have the Quad 12 Degree bend with a +1 Burgard stem. Can't tell you how I like it, though, because I didn't put them on yet.


Landon
DEVINF450R
11-16-2007, 02:20 PM
Does anyone else have problems with either side not wanting to "rebound". When I push it down it does not came all the way back up...and I have it tightened down even more than I actually should
Scro
11-16-2007, 02:26 PM
Mine was doing the same thing. I just took the hinge apart, cleaned and lubed it. They are brand new now.
mx1791
11-16-2007, 02:31 PM
i just got the bars, only rode them 1 time. i noticed the left side doesnt rebound like the right side does(doing exactly what yours are) but its VERY minor so im probably just a worry wart. i have the blue things in.

my neighbor also recently got a set and his left side of the bar wouldnt rebound at all so he sent them back to fasst and got them fixed. mines so minor i can prob just grease it up
TRX450RACER174
11-16-2007, 02:39 PM
Are these new bars or used one's you guys are having problems with? I know they specify not to get to much water in the hinge area as it will cause binding.
mx1791
11-16-2007, 03:14 PM
mine and my neighbors are bend new
d3ktrix
11-17-2007, 04:17 PM
Originally posted by mx1791
mine and my neighbors are bend new

Yup they did it out of the box.

Mine were so bad you couldn't even beat the hinge bolt out with a 5lb sledge if you wanted to.

They must press them in with some big *** press and don't notice how tight they are.

Sent em back and they work perfect now.