broken engine mount?

[08trx450er]

I have a set of moose nerf bars, and where they bolt to the motor mont both sides snapped. How do I get the old bolts out with no head? And is there any long term remedy for this as I feel this wont be the last time it will happen?:confused:

[Sjorge450R]

Originally posted by 08trx450er
I have a set of moose nerf bars, and where they bolt to the motor mont both sides snapped. How do I get the old bolts out with no head? And is there any long term remedy for this as I feel this wont be the last time it will happen?:confused:

Bolt extractor kit. You have to drill the bolt and then put the extractor in and then it turns the bolt out. But you should be able to just put a set of channel locks on the one side of the bolt and pull it right out.

[08trx450er]

Thanks for the info. Think I will try the channel locks first. Does this happen a lot?

[Sjorge450R]

Originally posted by 08trx450er
Thanks for the info. Think I will try the channel locks first. Does this happen a lot?

I have the AC propegs and i havent broken any bolts...yet