alot of aftermartket parts

[Honda250XRacer]

300ex/250x Part Out !
FOR SALE

The engine parts have about 1 hr of riding on them

TAKING OFFERS !

HMF w/ White brothers header- $290 plus shipping
4stroke tech cam $150
kibble white valve springs $90
versah valves $85
400ex carb $75
cylinder bored .80 $90
wiseco .80 12:1 piston $70
AC nerfbars with black nets $110
AC bumper no dirtscreen $45
black maier racing plastic $100 plus shipping
front stock gray 87 250X plastic $100 plus shipping
stock rear black plastic with red seat $125 plus shipping
lonestar axle $250
lonestar twin row bearing carrier $55
renthal bars $40

STOCK PARTS
frame 87 250x
polished side cases - 87 250X
kickstart lever
gas tank
thumb throttle
throttle cable
new clutch cable
swing arm
footpegs
brake lines
stock shocks fronts and rears
2 air boots air-box to carb
3 air boots carb to head
a-arms bottom 300ex
bottom-end of motor
steering stem
wiring harness
stock honda front and rear rims with tires
front & 2 rear brake calipers
4 axle hubs front with rotors
front spindles
swing arm skid plate
shock covers
maybe some other stuff i cant think of.

[Honda250XRacer]

EVERYTHING IS C L E A N

[Honda250XRacer]

pipe

[Honda250XRacer]

maier and stock plastic

[Honda250XRacer]

cam basically brand new ...bought in march ..installed in june and taken out after about 45 mins of riding .

[Honda250XRacer]

axle

[TRX-330]

can i ask what you cleaned ur engine with, its supper clean and cant figure out how to get mine that clean.

and how do you like the pipe setup, with the white bros header and hmf slip on.

[Honda250XRacer]

just put some aluminum acid on it which ate all the paint off and made it all really dull and then i had to buff everything out.

the pipe is sweet id say it the best money can buy.

[TRX-330]

if i had 290 id buy that pipe in a heart beat.

[honda8&3]

Got a picture of the nerf bars?

[Honda250XRacer]

...

What kind of carrier does it have and are the bearings good in it? If so how much for that?

[Honda250XRacer]

LONESTAR TWIN ROW CARRIER , THE BEARINGS ARE FINE 60dollars shipped.

Hmm how old is it and do you have any pictures?

[Honda250XRacer]

bought it last summer this is what it looks like

[Honda250XRacer]

.....

[honda8&3]

Is it a billet carrier?

[Honda250XRacer]

cast

Will the carrier work with my stock axle? Also how do you take money becuase I need new bearings but this is about the same price and easier to install then new bearings.

[honda8&3]

Yes it will fit;)

[pimpin330ex]

hey trevor how much did you want for just the front maier race cuts plastics shipped to my house

[Honda250XRacer]

still have everything .....would like to sell soon..


thanks

[JIMFROMTEXCO]

rear plastic, carrier, complete rear brake system, and grab bar? how much to 16411. (erie pa)

what do you have for bars?

[TRX-330]

would you take 200 plus shipping for the axle?

[Honda250XRacer]

pm'ed ya guys

[sadinkins]

do you have the head? if so is it ported and are the valves stock or bigger? what would you take for the whole top end (cylinder,piston,head)?

[Honda250XRacer]

no head.... the cylinder is .80 and the piston is an .80 over with 12:1 compression

[Honda250XRacer]

piston

[enduro400rider]

how much for a rear caliper?

[Honda250XRacer]

$55

[TRX-330]

Did you sell the carrier yet?

[Honda250XRacer]

nope sure havent..

thanks, Trent

[TRX-330]

How much shipped to 44473?

[glove man]

Do you still have parts. Nerfs, bumper, handlebars?

[Caseys 300ex]

How much for the piston and cylinder?

[Honda250XRacer]

id like 165 shipped.

[panther99]

what would it take to get a kick start to work on an '01 stock 300??

[panther99]

And, how much for the kick starter if it would work on my stock 300?

[Honda250XRacer]

no it is not going to work.

[1deadpresident]

Seat available? How much for stock seat shipped to 37031? Don't need fender...