Parting out!

[creed]

parting out an 04 yfz check classified parts section for more info!!!

[D-RIZZLE07]

What model of elka shocks are you selling and how much?

[creed]

Im keeping the elkas and the front end, going to try and buy another yfz next year.

[D-RIZZLE07]

Alright cool. What size sprockets are you running? I cant find the sweet spot in my gearing and my friends are killin me when we race which shouldn't happen cause i have alot of motor work done...

[creed]

are they getting you top end or bottom. if they are getting you off the line drop a tooth in the front. that really helped my 400ex off the line. I havent had much time on this setup i just bought it rode it three times then poof no spark. so im not sure the best fo the yfz but on my 400 i was taking the gate in second gear at the track with stock in the rear an a 14 in the front. and still pulling wheelys.

[D-RIZZLE07]

well i have dropped a tooth in the front and back so they get me out of the hole and on the hill so its like my gears top out just short of 4th gear up hills so i cant catch them. stock is supposed to be 14 38 and im at 13 37. i have way to much torque for that so i was told to keep the front stock and go up a couple from stock in the back. but this is my first 4 stroke so im not sure what to do im still in the learning process ya know.

[cdrookie]

go up a tooth on the front from stock. alot cheaper than buying a new rear sprocket...

[D-RIZZLE07]

alright i already have a 15 so i dont have to spend any money. how much will that help my spin?

[creed]

Ok this is what ive got up for sale!
Used frame $300, YZ426 carb $350, Front calipers pair $70 each $40,
Fluidyne radiator (damaged on top mounts but repairable $150,
Seat $50, Stock front bumper $15, Aftermarket subframe (has small weld) $100, AC grab bar with #plate bracket $30, Air box with Uni filter $50, Gastank needs knob for petcock $20, Front master cylinder $35,
Rear mastr cylinder line (worn) and pedal $60, Oil tank $60, Stock header with DG X2 silencer $150, Engine (cam mod, heavy duty clutch springs, lighteed flywheel, WR 450 crank and piston, new stator, has a broken top motor mount) $1300, Burgard -1 3/4 swing arm tha needs to be welded where dogbone attaches $200, I also have little odds and ends so message if your looking for something specific. This is the first time i've ever had a YFZ so im open to best offers as my prices are from what ive found elsewhere. Thanks for looking

Now the Burgard swing arm had a 250r carrier bearing $75, Lonestar 2+4 axle $200, 250r hubs $40, Rotor and locknut $75, and 250r rear caliper $60

I have pics of everything so please anyquestions please ask.

[creed]

Prices are without shipping!!

[creed]

here is a link with pics.
http://www.villagephotos.com/pubbrowse.asp?folder_id=1929233